Abdelfatah Mohamed Doma

• Supported quality team members over10 during corrective action updates.
• Coordinated with quality control staff to complete inspections.
• Contributed to root cause analysis to determine core reason for failures and errors.
• Performed quality inspections and drafted reports to detail non-conforming material issues.
• Led problem-solving activities to quickly identify and permanently resolve quality and productivity issues.
• Executed operational audits and assessed company operations, compliance and other associated risks.
• Facilitated process improvements to successfully decrease errors.
• Reported on non-compliance issues and other negative factors discovered during production.
• Maintained compliance with industry standards and regulatory compliance during managed projects.
• Researched and evaluated new techniques and technologies to improve product quality.
• Escalated concerns about project and process quality, referring discovered issues to engineering manager for correction.
• Developed traceability documentation to aid in investigating faults and defects.
• Partnered with senior management to analyze issues and find appropriate solutions.
• Drove corrective actions to accomplish project closure and recurrence control.
• Monitored and reported on test results and performance data to identify areas of opportunity for improvement.
• Trained and guided onsite and offshore team members in quality assurance standards, policies and procedures.

• Collaborated with stakeholders to transform client requirements into turnkey solutions.
• Recommended technology upgrades to improve client security.
• Assessed business requirements to create focused solutions.
• Researched and adopted new technologies to add value to existing offerings.
• Communicated and explained business requirements to team members to understand and implement functional demands.
• Collaborated with upper management to drive strategy and implement new processes.
• Performed internal system acceptance to deliver well-tested enhancements and meet business requirements.
• Conduct periodic quality assurance / quality control inspections on contractors and subcontractors on site and check compliance to client's and organization quality policies, procedures, and standards.
• Provided technical support in both on-site and telephone consultations.
• Monitored ongoing technical compliance with applicable laws and regulations.
• Guided, coached and lead project teams, delegating tasks and evaluating performance and progression of project pace.
• Handling around 10 clients per month and applying their requirements.

• Investigated variances, performed root-cause analysis and documented corrective actions to resolve complications.
• Established metrics, applied industry best practices and developed new tools and processes.
• Performed internal audits to maintain operating procedure and regulatory standards compliance.
• Analyzed quality management system metrics to identify trends, lead improvement projects and prepare third-party inspections and audits.
• Identified potential product risks and developed plans to mitigate or eliminate hazards.
• Established and updated QA processes and metrics in line with industry best practices and project goals.
• Wrote, reviewed and approved documents to preserve quality assurance.
• Communicated directly with QA team to resolve user-reported problems and questions.
• Acted as key point of contact for all QA aspects of releases by providing QA services and coordinating QA resources internally and externally.
• Established new and improved QA processes by developing test processes, test cases and assigning and executing tests.
• Analyzed quality threshold metrics to compile QMS reports.
• Performed and coordinate inspections and determined quality assurance testing models of raw materials and finished products.
• Interfaced with suppliers, inspectors and clients to resolve outstanding non-conformance issues prior to shipment.
• Trained and mentored junior engineers, providing guidance and direction.
• Collaborated with other departments to facilitate successful project completion.
• Developed comprehensive engineering documents for all projects.
• Monitored and evaluated engineering performance to recommend improvements.
• Implemented new strategies to reduce costs and improve efficiency of engineering team.
• Designed and implemented quality control processes to facilitate customer satisfaction.
• Created detailed reports on engineering activities and findings.
• Led engineering teams to successfully complete projects on time and within budget.
• Verified construction documentation to meet client requirements and vision.
• KPI shall exceed 95% for all disciplines as ARABTEC policies.

• Reviewed and validated quality requirements for manufacturing planning, supplier purchase orders, and engineering specifications to meet contract compliance regulations.
• Performed quality control audits on pre-production supply chain, verifying continuity of raw materials.
• Directed technical and administrative staff involved in quality control tasks.
• Determined root cause of deviations and non-conforming results and implemented appropriate corrective and preventive actions throughout product development process.
• Adhered to federal guidelines for quality control inspection.
• Inspected raw materials and finished products to verify quality and disposed items that did not meet safety requirements.
• Performed quality inspections and drafted reports to detail non-conforming material issues.
• Supported quality team members during corrective action updates.
• Coordinated with quality control staff to complete inspections.
• Escalated concerns about project and process quality, referring discovered issues to engineering manager for correction.
• Authorized by CSCEC to coordinate meetings with subcontractors.
• Responsible for Boreholes work in site (depth reach to 100 m) including site tests like Pressure meter test (PMT), SPT, Cross hole seismic test and Piezometers.
• Survey soil labs, prepare visits to check all equipment efficiency, study qualification documents and follow up with consultant till get approval.
• Monitoring soil investigation cycle at site, sending samples to approved labs and attending required tests, then sending results to consultant to continue for next steps.
• Prepare ITP (Inspection Test Plan) for ongoing activities and issue documents to get approval.
• Prepare kick-off meetings with subcontractors to explain QC requirements.
• Study market and shortlist steel factories to manufacture steel coupling beams.
• Inspect Post tension slabs. Slab was combined (PT slab and flat slab) and find solutions if there is any clash between PT wires path and any of other disciplines.
• Responsible for all tests required for Steel Coupling Beam till get approval. These tests consist of Lab Tests & Factory tests: -

Lab tests like (Tensile, chemical, Impact) & Factory tests like (UT, PT, Visual, dimension, bending for sheer studs).

• Oversaw quality assurance management and offered suggested recommendations.
• Conducted research to identify and evaluate new technologies and concepts.
• Implemented new strategies to reduce costs and improve efficiency of engineering team.
• Performed complex calculations to analyze and optimize engineering processes.
• Collaborated with other departments to facilitate successful project completion.

• Determined and scheduled priorities as required to progress engineering work.
• Monitored installation of materials and equipment for compliance with drawings and specifications.
• Completed construction tasks while providing safe working conditions, staying on budget and meeting project deadlines.
• Identified technical risks within managed projects.
• Delivered concise instructions to technical team to maintain quality control.
• Evaluated change order requests in response to out-of-scope work activities.
• Reviewed contractor proposals to determine favorable partnerships for on-time and under-budget project completion.
• Reviewed progress controls for project quality assurance.
• Performed constructability reviews of construction bid documents for coordination purposes.
• Assisted with cost proposal development and customer presentations.
• Trained junior engineers in workstation design and material handling.
• Developed high-quality engineering designs and plans to meet industry standards.
• Led engineering teams to successfully complete projects on time and within budget.
• Implemented new strategies to reduce costs and improve efficiency of engineering team.
• Collaborated with other departments to facilitate successful project completion.
• Handling around 10 clients per month and applying their requirements.

• Recorded daily events and activities in site diary to evaluate process and improve productivity.
• Oversaw quality control and health and safety matters for construction teams.
• Compiled and presented reports explaining project details to non-technical stakeholders.
• Created work schedules and adjusted as needed to meet project deadlines and keep shifts properly staffed.
• Checked technical designs and drawings for adherence to standards.
• Applied engineering principles to troubleshooting and followed up on defined corrective actions to prevent reoccurrences.
• Suggested process and technical design changes to improve performance and efficiency.
• Gathered data, incorporating into drawings, schematics and maps.
• Developed safety awareness program consisting of construction safety audits and safety meetings.
• Facilitated and led site engineering projects relating to new or upgraded equipment, facilities and quality initiatives.
• Visited project sites during construction to monitor progress and consult with contractors and on-site engineers.
• Reviewed and assisted in performing technical bid analysis.
• Estimated materials costs and sourcing requirements for project feasibility.
• Performed construction observation and took soil samples.
• Supervised various municipal works and modernization projects and performed line and grade surveys.
• Tested soils and materials to determine foundation strength.
• Coordinate and obtain necessary approvals from consultant.
• Collaborated with civil technicians to gather project equipment and update maps, drawings and blueprints.
• Leading more than 100 labors per day with different nationalities to achieve required work at site.
• Determined and scheduled priorities as required to progress engineering work
• Ordered and tracked delivery of construction materials and supplies from vendors
• Reviewed calculations and analytical data to maintain accuracy of technical reports

• Provided secondary training to personnel struggling with technological tools and systems.
• Executed troubleshooting and server support in both in-person and remote situations.
• Monitored ongoing technical compliance with applicable laws and regulations.
• Authored technical guidance explainers and whitepapers on systems for use by senior leadership.
• Produced reports on success rates and remedial requirements.
• Identified and corrected system faults to minimize operational system downtime.
• Wrote work orders, accounting for standard budgeting guidelines and operational parameters.
• Performed scheduled service work, installations, testing and repairs.
• Conducted research to identify and evaluate new technologies and concepts.
• Assisted in developing cost-effective solutions to engineering problems.
• Performed complex calculations to analyze and optimize engineering processes.
• Developed and maintained relationships with suppliers to facilitate quality and timely delivery of materials.
• Designing many towers according to Wind & Earthquake by using SAP, SAFE, E-TABS Software Programs.
• Matching between civil drawings and architectural drawings, how it is practically applied at site and record comments.
• Follow-up and observing interior house finishing (Paints, Covering floor, and decoration)
• Handling around 10 clients per month and applying their requirements.

• Member of Syndicate of Engineers with membership no. 12/4401548
• Member of (EA) Engineering Australia with ID no. 9777035 and ANZSCO code 233211