Agus Kusnandar Syamsudin
Padalarang-Bandung Barat, Indonesia 40553. +6285795131248. (RUAE4103 Riyadh) ,Saudi Arabia
Summary
Driven to achieve the best results for customers satisfaction, self-motivated professional with expertise in technical illustration and post-image capture processing. Demonstrated ability to produce effective instruction material content. Seeking Illustrator position with company.
Overview
35
35
years of professional experience
16
16
years of post-secondary education
1
1
Certification
Work History
GE-T700 ENGINE TRAINER
GE-TRAINCROFT
Riyadh, KSA (KINGDOM OF SAUDI ARABIA)
02.2023 - Current
- Analyzed training requirements at individual, team and organizational level to achieve goal T700 US Army (SRD) Approval.
- Planned training schedules for T700 Engine Maintenance program, prepared materials effective training manuals.
- Devised and coordinated learning and development activity aligned with all the shop related for T700 Engine maintenance program.
- Developed detailed training manuals, Work Instructions of machines and Tools for GE-T700 Maintenance program.
- Implemented competency frameworks to identify required key skills and design responsive development strategies.
Principal Mechanic and Certifying Staff
NTP (NUSANTARA TURBINE DAN PROPULSI)
Bandung, Indonesia
04.2022 - 02.2023
- Certify the CT7 Engine to release for service after maintenance performed, Overhaul, Repair Comply SB's or Upgraded then rise the COC.
- Ensured to follow the company Policy, Quality Standard Procedures and Instructions and conform to the O.E.M Manual.
- Review the Log Book and entry data for life limit Items to ensure there is no exceeded remaining limit was installed, ensure all AD's and A.SB's are complied, all the work control documents were sign off and conform to the O.E.M T.O and follow the Quality Standard procedures and Instructions.
- Perform CT7 Engine/Modules Receiving Inspection, Boroscope Inspection, Minor Repair, Module/Engine Build up, Trouble Shooting, work pack clearing, released Engine for Testing and Field Service of Replacement Hot Section, PT.Module and Boroscope Inspection of Engine on Wing.
- Acted as team leader for the team with the objective of providing daily assistance to the task/job conducted.
- Paid close attention to customers concerns and addressed their queries and achieved an exceptional level of customer service.
- Completed daily reports of controlling tools and equipment's, repair requirements for parts and tools.
- Maintained active control over tools and equipment while being aware of FOD which resulted in safe and organized work area at all time.
- Independently conducted inspection and applied corrosion control substances where needed.
GE-CT7/T700 Engine Maintenance Supervisor
AMMROC
Abu Dhabi, UAE
01.2014 - 06.2020
- Made suggestions to management regarding operational improvements to improve quality of product, improvement in production times and reduced costs
- Released/Raised the COC of the product (GE CT7/T700 Engine) to release for service to customer and Field Service of Replacement Hot Section, PT.Module and Boroscope Inspection of Engine On Wing
- Ensured company and staff complied with all regulations, policies and procedures for health, safety, and environmental issues
- Designed and implemented production tracking and quality control systems, assessed production and maintenance schedules to identify production issues, and produced operational reports
- Maintained productivity by scheduling maintenance and supervised necessary repairs
- Provided inspection of finished products to determine quality and compliance with customer's orders
- Responsible for maintaining adequate product stock levels on type line
- Responsible for quality control of products and/or service to maintain customer loyalty
- Evaluated production needs and organized, scheduled, and assigned work to staff
- Completed work accurately and efficiently according to standard operating procedures.
GE-CT7/T700 Engine Principal technician
AMMROC
Abu Dhabi
01.2010 - 12.2014
- Perform CT7/T700 Engine/Modules Receiving Inspection, Boroscope Inspection, Tear Down, Bench Inspection, Minor Repair, Module/Engine Build up, Trouble Shooting, work pack clearing, released Engine for Testing
- Log Book Entry and Field Service of Replacement Hot Section, PT.Module and Boroscope Inspection of Engine On Wing
- Completed daily reports of controlling tools and equipment's, repair requirements for parts and tools
- Clearing work control documents i.a.w Policy, Quality Standard Procedures and Instructions, ensure conform the O.E.M T.O and all related regulations
- Acted as team leader for the team with the objective of providing daily assistance to the task/job conducted
- Paid close attention to customers' concerns and addressed their queries and achieved an exceptional level of customer service
- Maintained active control over tools and equipment while being aware of F.O.D which resulted in safe and organized work area at all times
- Independently conducted inspections and applied corrosion control substances where needed
- Ensured to follow the company Policy, Quality Standard Procedures and Instructions and conform The O.E.M Manual.
GE-CT7/T700 Engine Principal Technician
GAMCO
Abu Dhabi
01.2008 - 01.2010
- Perform CT7/T700 Engine/Modules Receiving Inspection, Boroscope Inspection, Tear Down, Bench Inspection, Minor Repair, Module/Engine Build up, Trouble Shooting, work pack clearing, released Engine for Testing and Field Service of Replacement Hot Section, PT.Module and Boroscope Inspection of Engine On Wing
- Acted as team leader for the team with the objective of providing daily assistance to the task/job conducted
- Paid close attention to customers concerns and addressed their queries and achieved an exceptional level of customer service
- Completed daily reports of controlling tools and equipments, repair requirements for parts and tools
- Maintained active control over tools and equipment while being aware of FOD which resulted in safe and organized work area at all times
- Independently conducted inspections and applied corrosion control substances where needed
- Ensured to follow the company Policy, Quality Standard Procedures and Instructions and conform The O.E.M Manual.
GE-CT7/T700 Engine Principal Technician
GAMCO
Abu Dhabi
06.2004 - 12.2007
- Perform CT7/T700 Engine/Modules Receiving Inspection, Boroscope Inspection, Tear Down, Bench Inspection, Minor Repair, Module/Engine Build up, Trouble Shooting, work pack clearing, released Engine for Testing and Field Service of Replacement Hot Section, PT.Module and Boroscope Inspection of Engine On Wing
- Acted as team leader for the team with the objective of providing daily assistance to the task/job conducted
- Paid close attention to customers concerns and addressed their queries and achieved an exceptional level of customer service
- Completed daily reports of controlling tools and equipments, repair requirements for parts and tools
- Maintained active control over tools and equipment while being aware of FOD which resulted in safe and organized work area at all times
- Independently conducted inspections and applied corrosion control substances where needed
- Ensured to follow the company Policy, Quality Standard Procedures and Instructions and conform The O.E.M Manual.
GE-CT7 Engine Inspector
NTP
Bandung
01.1998 - 06.2004
- Ensured products produced were in accordance to design and specifications products ordered
- Inspected production line to determine problems and collaborated with supervisors to resolve issues with production.
GE-CT7 Engine Certifying Staff
NTP
Bandung
01.2002 - 01.2004
- Certify the CT7 Engine to release for service after maintenance performed, Overhaul, Repair, Comply SB's or Upgraded
- Review the Log Book and entry data for life limit Items to ensure there is no exceeded remaining limit was installed, ensure all AD's and A.SB's are complied, all the work control documents were sign off and conform to the O.E.M T.O and follow the Quality Standard Procedures and Instructions.
GE-CT7 Engine Principal Technician
NTP
Bandung
01.1994 - 01.1998
- Perform CT7 Engine/Modules Receiving Inspection, Boroscope Inspection, Tear Down, Bench Inspection, Minor Repair, Module/Engine Build up, Trouble Shooting, work pack clearing, released Engine for Testing and Field Service of Replacement Hot Section, PT.Module and Boroscope Inspection of Engine On Wing
- Acted as team leader for the team with the objective of providing daily assistance to the task/job conducted
- Paid close attention to customers concerns and addressed their queries and achieved an exceptional level of customer service
- Completed daily reports of controlling tools and equipments, repair requirements for parts and tools
- Maintained active control over tools and equipment while being aware of FOD which resulted in safe and organized work area at all times
- Independently conducted inspections and applied corrosion control substances where needed
- Ensured to follow the company Policy, Quality Standard Procedures and Instructions and conform The O.E.M Manual.
GE-CT7 Engine Technician/Mechanic
NTP
Bandung
01.1990 - 01.1994
- Perform CT7 Engine/Modules Tear Down, Module/Engine Build up, following O.E.M T.O, work control documents, and Quality Instructions
- Maintained active control over tools and equipment while being aware of FOD which resulted in safe and organized work area at all times.
Education
Bachelor of Engineering - Faculty of Technical Science
Universitas Islam Balitar
Indonesia 08.2019 - 08.2023
Diploma in Mechanical Engineering - Faculty of Technical Science
Universitas Ahmad Yani
Indonesia 06.1994 - 09.2000
Apprentice Training for Aircraft Engine Mechanic - Mechanical Engineering
Training Centre-IPTN
Bandung-Indonesia 06.1987 - 01.1990
Technical High School for Electricity Department - Electricity Department
Senior Technical High School
Garut-Indonesia 06.1983 - 07.1986
Skills
- SATISFIED OF QUALITY WORK AND CONTROL OF PRODUCT GE-AIRCRAFT ENGINE CT7/T700 INDEPENDENTLY CAPABLE TO PERFORM HOT SECTION AND PTMODULE REPLACEMENT ON WING, BOROSCOPE INSPECTION ON WING, ENGINE LOG BOOK/CARD REVIEW, ENGINE RECEIVING INSPECTION, BOROSCOPE INSPECTION, TEAR DOWN ENGINE/MODULES, BENCH INSPECTION, DETERMINE ITEMS FOR REPAIR AND SCRAPING, SB/ASB/AD COMPLY, MINOR REPAIR, MODULES/ENGINE BUILD UP, RELEASE FOR TESTING, TROUBLE SHOOTING DURING ENGINE TESTING, SHIPPING AND SERVICING, AND RELEASE FOR SERVICE
Certification
- QUALITY CONTROL (QC7) Operation Technician Course.
- Balancing Machine and Measuring Instrument CAB925 of SCHENK RO.TECH
- F110 ENGINE FAMIALIZATION.
- OVER-HEAD CRANE OPERATOR.
- GE-CT7 and GE-T700 ENGINE BOROSCOPE INSPECTION.
- GE-T700-701C Turbo Shaft - GE-CT7 Turbo Prop Overhaul Familiarization, Disassembly/Assembly and Inspection.
sections.external_links.name
Accomplishments
- CERTIFICATE OF APPRECIATION (As an expression of our appreciation for your outstanding contribution as a valuable team member. Your quality is outstanding and attitude toward work is admirable). AMMROC
- CERTIFICATE OF RECOGNITION (on Behalf of AMMROC, We thank you for our Contribution and Commitment to the support of the Team and Company). MEPC
- CERTIFICATE OF APPRECIATION (This certificate awarded for your Outstanding Effort and Record-Breaking Achievement in May 2024. Your Exceptional dedication and performance have set a new record in F110-129 Engine Assembly, showcasing your commitment to excellence and innovation).
- CERTIFICATE OF APPRECIATION (For successfully MEPC (Middle East Propulsion Company Limited) has obtained an authorization to perform maintenance and Repair and Overhaul on the T700 Series Engine of the Blackhawk and Apache Helicopters from the SRD (System Readiness Directorate) of the US-ARMY Aviation. Your outstanding dedication, motivation and hard work to the T700 program meet the expectation). GE
Affiliations
- Tenis, Badminton, Fishing
Timeline
GE-T700 ENGINE TRAINER
GE-TRAINCROFT
02.2023 - Current
Principal Mechanic and Certifying Staff
NTP (NUSANTARA TURBINE DAN PROPULSI)
04.2022 - 02.2023
Bachelor of Engineering - Faculty of Technical Science
Universitas Islam Balitar
08.2019 - 08.2023
GE-CT7/T700 Engine Maintenance Supervisor
AMMROC
01.2014 - 06.2020
GE-CT7/T700 Engine Principal technician
AMMROC
01.2010 - 12.2014
GE-CT7/T700 Engine Principal Technician
GAMCO
01.2008 - 01.2010
GE-CT7/T700 Engine Principal Technician
GAMCO
06.2004 - 12.2007
GE-CT7 Engine Certifying Staff
NTP
01.2002 - 01.2004
GE-CT7 Engine Inspector
NTP
01.1998 - 06.2004
Diploma in Mechanical Engineering - Faculty of Technical Science
Universitas Ahmad Yani
06.1994 - 09.2000
GE-CT7 Engine Principal Technician
NTP
01.1994 - 01.1998
GE-CT7 Engine Technician/Mechanic
NTP
01.1990 - 01.1994
Apprentice Training for Aircraft Engine Mechanic - Mechanical Engineering
Training Centre-IPTN
06.1987 - 01.1990
Technical High School for Electricity Department - Electricity Department
Senior Technical High School
06.1983 - 07.1986
Similar Profiles
Khoa NguyenKhoa Nguyen
Customs Operational Leader at GE Power, GE Healthcare, GE RenewableCustoms Operational Leader at GE Power, GE Healthcare, GE Renewable
Louis PettingillLouis Pettingill
All Around Cell Member at GE Aerospace (Formerly GE Aircraft)All Around Cell Member at GE Aerospace (Formerly GE Aircraft)
Baldeep Pal Singh BaliBaldeep Pal Singh Bali
Senior Sales & Segment Leader (M&D) at GE Vernova T&D India Ltd. (GE Vernova)Senior Sales & Segment Leader (M&D) at GE Vernova T&D India Ltd. (GE Vernova)