ARBIE F. PESIMO
Summary
Production Professional experienced in setting up, maintaining, and operating machining equipment. Demonstrated proficiency in machine troubleshooting and product inspection, with strong capabilities in reading and interpreting blueprints and schematics. Pipefitter with comprehensive knowledge in managing teams and coordinating job sites, emphasizing safety processes and regulations in pipe selection.
Overview
1
1
Language
19
19
years of professional experience
Work History
CNC MACHINE OPERATOR
Nasser Mohammed Al Baddah & Partner for Con.
09.2024 - Current
- Machine Setup & Nesting:
- Loading metal plates onto the plasma bed using “nesting” software like ProNest to arrange parts for maximum material efficiency and minimum waste. Operation & Torch Calibration Adjusting arc voltage, gas pressure (oxygen, nitrogen, or compressed air), and torch height to ensure clean cuts.
- Material Handling:
- Operating overhead cranes or forklifts to move heavy steel plates or pipes onto the cutting table. Precision Finishing:
- Removing dross/slaf from finished parts using grinders and beveling edges to prepare them for subsequent welding.
- Consumable Management:
- Such as nozzles and electrodes, which wear down quickly due to the high-intensity plasma arc.
- Operated CNC machinery to produce precision components, ensuring adherence to quality standards.
- Calibrated and maintained CNC machines, resulting in reduced downtime and increased production efficiency.
- Interpreted technical drawings and specifications to execute complex machining operations accurately.
- Conducted routine inspections of finished products, guaranteeing compliance with design specifications.
- Reduced material waste through precise programming of CNC machines for accurate cutting and milling operations.
PIPEFITTER/CNC OPERATOR
BR. C.A.T. INT. CO. LMTD
04.2015 - 02.2022
- Machine Setup & Nesting:
- Loading metal plates onto the plasma bed using “nesting” software like ProNest to arrange parts for maximum material efficiency and minimum waste. Operation & Torch Calibration Adjusting arc voltage, gas pressure (oxygen, nitrogen, or compressed air), and torch height to ensure clean cuts.
- Material Handling:
- Operating overhead cranes or forklifts to move heavy steel plates or pipes onto the cutting table. Precision Finishing:
- Removing dross/slaf from finished parts using grinders and beveling edges to prepare them for subsequent welding.
- Consumable Management:
- Such as nozzles and electrodes, which wear down quickly due to the high-intensity plasma arc.
- Operated CNC machinery to produce precision components, ensuring adherence to quality standards.
- Monitored machine operations, troubleshooting issues to minimize downtime and enhance efficiency.
- Conducted regular maintenance on CNC equipment, prolonging lifespan and improving operational reliability.
- Interpreted technical drawings and specifications, accurately programming CNC machines for optimal production.
- Fabricated and installed piping systems, ensuring compliance with industry standards and specifications.
- Operated CNC machinery to produce precision components, enhancing production efficiency and accuracy.
- Collaborated with cross-functional teams to troubleshoot and resolve operational issues effectively.
- Conducted regular maintenance on equipment, reducing downtime and improving overall project timelines.
PIPEFITTER
ARABIAN ETIMAAD IND. CO.
09.2013 - 07.2014
- Performed installation of various piping systems according to project specifications.
- Install, assemble, and fit piping systems (carbon steel, stainless steel, PVC, etc.)
- Read and interpret isometric drawings, P&IDs, and layout plans
- Measure, cut, thread, and bend pipes to required specifications
- Align pipes and secure them using clamps, brackets, and supports2. Fabrication and Preparation
- Prepare pipe spools based on drawings
- Perform pipe cutting, beveling, and edge preparation
- Fit-up pipes, flanges, valves, and fittings before welding
- Ensure proper dimensions, tolerances, and alignment3. Maintenance and Repair
- Inspected pipelines for leaks, corrosion, and damage to ensure operational safety
- Repair or replace defective pipes, valves, and fittings
- Perform routine maintenance on piping systems4. Testing and Inspection Support
- Assisted in hydrotesting and pressure testing of pipelines to verify system integrity and compliance
- Check for leaks and ensure system integrity
- Work with QC inspectors to meet project standards5. Safety and Compliance
- Follow safety procedures and use PPE at all times
- Comply with site standards (e.g., Aramco, ASME Codes).
- Identify hazards and report unsafe conditions6. Tools and Equipment Handling
- Use hand tools and power tools (grinders, cutters, threading machines)
- Operate lifting equipment when required (with proper certification)7. Team Coordination
- Work closely with welders, supervisors, and engineers
- Follow instructions from foreman or supervisor
- Assist in planning daily work activities
PIPEFITTER
SHILOH INT. CORP.
01.2010 - 07.2011
- Installation Work
- Install, assemble, and fit piping systems (carbon steel, stainless steel, PVC, etc.)
- Read and interpret isometric drawings, P&IDs, and layout plans
- Measure, cut, thread, and bend pipes to required specifications
- Align pipes and secure them using clamps, brackets, and supports2. Fabrication and Preparation
- Prepare pipe spools based on drawings
- Perform pipe cutting, beveling, and edge preparation
- Fit-up pipes, flanges, valves, and fittings before welding
- Ensure proper dimensions, tolerances, and alignment3. Maintenance and Repair
- Inspect pipelines for leaks, corrosion, or damage
- Repair or replace defective pipes, valves, and fittings
- Perform routine maintenance on piping systems4. Testing and Inspection Support
- Assist in hydrotesting and pressure testing of pipelines
- Check for leaks and ensure system integrity
- Work with QC inspectors to meet project standards5. Safety and Compliance
- Follow safety procedures and use PPE at all times
- Comply with site standards (e.g., Aramco, ASME codes)
- Identify hazards and report unsafe conditions6. Tools and Equipment Handling
- Use hand tools and power tools (grinders, cutters, threading machines)
- Operate lifting equipment when required (with proper certification)7. Team Coordination
- Work closely with welders, supervisors, and engineers
- Follow instructions from foreman or supervisor
- Assist in planning daily work activities
PIPEFITTER
SALCON POWER PLANT
07.2008 - 09.2008
- Installation Work
- Install, assemble, and fit piping systems (carbon steel, stainless steel, PVC, etc.)
- Read and interpret isometric drawings, P&IDs, and layout plans
- Measure, cut, thread, and bend pipes to required specifications
- Align pipes and secure them using clamps, brackets, and supports2. Fabrication and Preparation
- Prepare pipe spools based on drawings
- Perform pipe cutting, beveling, and edge preparation
- Fit-up pipes, flanges, valves, and fittings before welding
- Ensure proper dimensions, tolerances, and alignment3. Maintenance and Repair
- Inspect pipelines for leaks, corrosion, or damage
- Repair or replace defective pipes, valves, and fittings
- Perform routine maintenance on piping systems4. Testing and Inspection Support
- Assist in hydrotesting and pressure testing of pipelines
- Check for leaks and ensure system integrity
- Work with QC inspectors to meet project standards5. Safety and Compliance
- Follow safety procedures and use PPE at all times
- Comply with site standards (e.g., Aramco, ASME codes)
- Identify hazards and report unsafe conditions6. Tools and Equipment Handling
- Use hand tools and power tools (grinders, cutters, threading machines)
- Operate lifting equipment when required (with proper certification)7. Team Coordination
- Work closely with welders, supervisors, and engineers
- Follow instructions from foreman or supervisor
- Assist in planning daily work activities
PIPE FABRICATOR
QATAR ENG. CONS. CO.
02.2008 - 04.2008
- Installation Work
- Install, assemble, and fit piping systems (carbon steel, stainless steel, PVC, etc.)
- Read and interpret isometric drawings, P&IDs, and layout plans
- Measure, cut, thread, and bend pipes to required specifications
- Align pipes and secure them using clamps, brackets, and supports2. Fabrication and Preparation
- Prepare pipe spools based on drawings
- Perform pipe cutting, beveling, and edge preparation
- Fit-up pipes, flanges, valves, and fittings before welding
- Ensure proper dimensions, tolerances, and alignment3. Maintenance and Repair
- Inspect pipelines for leaks, corrosion, or damage
- Repair or replace defective pipes, valves, and fittings
- Perform routine maintenance on piping systems4. Testing and Inspection Support
- Assist in hydrotesting and pressure testing of pipelines
- Check for leaks and ensure system integrity
- Work with QC inspectors to meet project standards5. Safety and Compliance
- Follow safety procedures and use PPE at all times
- Comply with site standards (e.g., Aramco, ASME codes)
- Identify hazards and report unsafe conditions6. Tools and Equipment Handling
- Use hand tools and power tools (grinders, cutters, threading machines)
- Operate lifting equipment when required (with proper certification)7. Team Coordination
- Work closely with welders, supervisors, and engineers
- Follow instructions from foreman or supervisor
- Assist in planning daily work activities.
PIPEFITTER
E.E.I CONSTRUCTION
06.2007 - 01.2008
- Installation Work
- Install, assemble, and fit piping systems (carbon steel, stainless steel, PVC, etc.)
- Read and interpret isometric drawings, P&IDs, and layout plans
- Measure, cut, thread, and bend pipes to required specifications
- Align pipes and secure them using clamps, brackets, and supports2. Fabrication and Preparation
- Prepare pipe spools based on drawings
- Perform pipe cutting, beveling, and edge preparation
- Fit-up pipes, flanges, valves, and fittings before welding
- Ensure proper dimensions, tolerances, and alignment3. Maintenance and Repair
- Inspect pipelines for leaks, corrosion, or damage
- Repair or replace defective pipes, valves, and fittings
- Perform routine maintenance on piping systems4. Testing and Inspection Support
- Assist in hydrotesting and pressure testing of pipelines
- Check for leaks and ensure system integrity
- Work with QC inspectors to meet project standards5. Safety and Compliance
- Follow safety procedures and use PPE at all times
- Comply with site standards (e.g., Aramco, ASME codes)
- Identify hazards and report unsafe conditions6. Tools and Equipment Handling
- Use hand tools and power tools (grinders, cutters, threading machines)
- Operate lifting equipment when required (with proper certification)7. Team Coordination
- Work closely with welders, supervisors, and engineers
- Follow instructions from foreman or supervisor
- Assist in planning daily work activities.
Education
High School Diploma -
F. G CALDERON INTEGRATED SCHOOL
04.2001 -
Skills
CNC programming
CNC assembly operations
CNC cutting techniques
CNC installation practices
Blueprint reading
Blueprints specifications
Quality control
Safety compliance
Safety protocols
Machine setup
Computer skills
CNC cutting techniques
Timeline
CNC MACHINE OPERATOR
Nasser Mohammed Al Baddah & Partner for Con.
09.2024 - Current
PIPEFITTER/CNC OPERATOR
BR. C.A.T. INT. CO. LMTD
04.2015 - 02.2022
PIPEFITTER
ARABIAN ETIMAAD IND. CO.
09.2013 - 07.2014
PIPEFITTER
SHILOH INT. CORP.
01.2010 - 07.2011
PIPEFITTER
SALCON POWER PLANT
07.2008 - 09.2008
PIPE FABRICATOR
QATAR ENG. CONS. CO.
02.2008 - 04.2008
PIPEFITTER
E.E.I CONSTRUCTION
06.2007 - 01.2008
High School Diploma -
F. G CALDERON INTEGRATED SCHOOL
04.2001 -
PERSONAL INFORMATION:
- DATE OF BIRTH : MARCH 16, 1984
- PLACE OF BIRTH : MANILA
- AGE : 42 yrs. old
- SEX : MALE
- CIVIL STATUS : SINGLE
- CITIZENSHIP : FILIPINO
- HEIGHT : 5'6"
- WEIGHT : 180LBS
- RELIGION : CATHOLIC
- PASSPORT : P8748581B
- SSS NO. : 33-9339231-2