AUQBAH BIN NAFEA ALARDHI

(OMPP):

Onshore Maintain Potential Project.

Client: SAUDI ARAMCO

• Involved in piping designs and pipe routing.

• Preparing Material take-off.
• Reviewing all IFC Isometric drawings.

• Participate in Cost Management and weekly progress Meetings.

• Preparing and monitoring the daily and weekly progress report.

• Assist in Sourcing Construction Materials for Piping Systems.

• Inspect all delivered piping materials at site as per material approval and project specifications.

• Responsible for the inspection of piping installation as per standard and specifications.

• Prepared hydro test package and submit to Aramco for approval.

• Fit-up inspection of stainless-steel pipe and fittings as per IFC drawing and standard.

• Valve Installation Inspection.

• Prepare red line and as built drawings prior to installation inspection as per the project requirements.

• Coordinate with other discipline inspector and other sections as required to ensure smooth flow of information during the development and execution of the project.

• Checking of isometric and related drawing that does not conform to Piping General Arrangement, P&IDs, Specifications and Project Standards.

• Responsible for workers commitment to safe working practices and adherence to company safety policy.

• Receiving Inspection of Sprinkler System Components and Hardware
• Inspect sprinkler and standpipe installation.

• Inspect hangers and supports installation
• Material verification and visual inspection of Fire Hydrants and accessories.

• Inspection installation of fire water isolation valves.

• Inspection of structural supports.

Project:

(UTD):

Upgrade Tanks Dewatering

Client: SAUDI ARAMCO

The scope of work translates engineering, procurement and construction requirements, Saudi

Aramco expectations, and the way that LSTK CONTRACTOR shall execute Engineering,

Procurement and construction work associated with the following scope changes under "BI-10-

00930 - Upgrade Tank Dewatering systems at Ju'aymah and Ras Tanura Terminals."

Operating Philosophy for Ras Tanura Terminal South (RTTS)

Operating Philosophy for Ju'aymah Tank Farm (JTF)

Pressure Limitation of Existing 7.1km Oily Water Transfer Pipeline

Existing Electrical System Deficiencies at RTTN, RTTS, and JTF

This document is altering the project scope of certain scope elements as defined in this

document. Other scopes which are not impacted by the subject change shall remain unchanged.

CONTRACTOR shall have complete project responsibility for the performance associated with

the change order scope of work and all work defined under CONTRACT to ensure that project

delivered is fully functional per COMPANY standards and procedures.

CONTRACTOR shall undergo all necessary design development to arrive at optimum conditions

for design, construction and efficiency of operations and maintenance throughout the

performance of the work and the life of the facilities.

• Created detailed project schedules, working closely with contractors to manage deadlines
• Following up with all Nesma/SAPMT pending items.
• Minutes of Meeting updates and Project issue log.
• Conducting weekly site visit.

Project:

Hawiyah Unayzah Gas Reservoir Storage.

Client: SAUDI ARAMCO

(HUGRS):

The primary objective of this project is to provide the necessary facilities to

store off‐peak surplus sales gas via injection into the Hawiyah Unayzah

reservoir during the low demand season for reproduction back to the Master

Gas System during high demand, thereby maximising gas plants utilisation.

The WORK includes a combination of Greenfield / Brownfield work within a

large and remote geographic operating area, as generally depicted in the

below aerial overview. The map below shows the identified location for the gas

processing facilities and the identified locations for the new proposed pipeline

routes from the wells to the facilities and from the facilities to the Master Gas

System.

• Involved in piping designs and pipe routing.
• Preparing Material take-off.
• Reviewing all IFC Isometric drawings.
• Participate in Cost Management and weekly progress Meetings.
• Preparing and monitoring the daily and weekly progress report.
• Assist in Sourcing Construction Materials for Piping Systems.
• Inspect all delivered piping materials at site as per material approval and project specifications.
• Responsible for the inspection of piping installation as per standard and specifications.
• Prepared hydro test package and submit to Aramco for approval.
• Fit-up inspection of stainless-steel pipe and fittings as per IFC drawing and standard.
• Valve Installation Inspection.
• Prepare red line and as built drawings prior to installation inspection as per the project requirements.
• Coordinate with other discipline inspector and other sections as required to ensure smooth flow of information during the development and execution of the project.
• Checking of isometric and related drawing that does not conform to Piping General Arrangement, P&IDs, Specifications and Project Standards.
• Responsible for workers commitment to safe working practices and adherence to company safety policy.
• Receiving Inspection of Sprinkler System Components and Hardware
• Inspect sprinkler and standpipe installation.
• Inspect hangers and supports installation
• Material verification and visual inspection of Fire Hydrants and accessories.
• Inspection installation of fire water isolation valves.
• Inspection of structural supports.
• Flange Joint Inspection- Gasket Verification and Bolt tightening.

• Checking the Facility and safety requirements prior to deliver the required equipment at site.

• Receiving and arranging heavy & light equipment for our client, requests and process all the logistics to transports the equipment to the requested locations.