Hesham Abdel-Zaher

I am working as a Head of Electro-Mechanical department and responsible for Follow up the Contractor works and confirms with specification and standards below is my task and scope of work:

• Offered technical guidance, peer review and mentorship to junior engineers.
• Supported on-time and under-budget project completion by proactively communicating challenges and updates.
• Performed monthly safety walks and escalated concerns in line with procedures.
• Prepare Requests for Information (RFI) when necessary.
• Led project scheduling and budgeting to successfully complete engineering projects within target parameters.
• Tracked project expenses against budgets and identified cost-saving opportunities.
• Enforced project-wide compliance with internal and external standards and procedures.
• Negotiated with vendors and service providers to control corporate expenditures.
• Reduced Non-Productive Time (NPT) through risk mitigation and technical troubleshooting.
• Used correct methodology to calculate parameters and make correct design choices.
• Drove on-time and under-budget project completion by communicating data and updates regarding to project support team.
• Led or facilitated job briefs, setting to work meetings and readiness reviews.
• Consulted on engineering projects, offering mechanical perspective to different disciplines in collaborative environment.
• Analysed technical designs and prototypes at each stage of product development lifecycle.
• Offered technical evaluations and calculations to improve design processes.
• Specified system components and directed product modifications for conformance with engineering design and performance specifications.
• Crafted project documentation including work order cards, method statements, construction plans and risk assessments.
• Reviewed designs with constructive feedback to improve project outcomes.
• Implemented technical system solutions according to engineering principles.
• Generated quotations for site-based project work based on client consultation and walk-downs.
• Collaborated with engineering team to complete projects.
• Calculated tolerances and loads to optimize mechanical designs.
• Built complete system designs for (Plumbing, Fire Fighting and HVAC) applications using accurate data and iterative processes.
• Monitored project progress and identified operational concerns to limit delays and overspends.
• Worked with Revit and AutoCAD to draft assemblies, models and technical drawings and Preparing the Shop Drawings and as built Drawings.
• Recorded project spending and progress to enable performance evaluations.
• Wrote reports outlining project progress and results.
• Responsible for Follow up all Electro-mechanical System (HVAC, firefighting, Plumbing and all Electric works).
• Responsible for making design calculations for Mechanical Systems (HVAC, Firefighting and Plumbing).
• Coordinate between site work and design office work according to priority and schedules.
• Preparing the inventory of materials and request it as per approved materials.
• Checking all the services which are installed before handling over to the client to achieve high quality according to standards complying with the specifications.
• Coordinating relation with other civil and architectural department to avoid any kind of installation obstruction.
• Visually inspect pumps, valves, and all Electro-mechanical joints visually inspect components to ensure that all equipment is operating, safety systems are in place, and no unusual leaks exist.
• Solve any arising problems at the site and make coordination between other departments.
• Attend a coordination meeting between other departments to arrange work schedule depending on the priority.
• Ensure that all Mechanical and Electrical site activities are conducted under controlled conditions as per shop drawings.
• Check Purchase Order and material to ensure that Materials are properly Specification.
• Flushing and hydro test for fire protection & Plumbing systems as per Standards.

I am working as a Head of Electro-Mechanical department and responsible for Follow up the Contractor works and confirms with specification and standards below is my task and scope of work:

• Offered technical guidance, peer review and mentorship to junior engineers.
• Supported on-time and under-budget project completion by proactively communicating challenges and updates.
• Performed monthly safety walks and escalated concerns in line with procedures.
• Prepare Requests for Information (RFI) when necessary.
• Led project scheduling and budgeting to successfully complete engineering projects within target parameters.
• Tracked project expenses against budgets and identified cost-saving opportunities.
• Enforced project-wide compliance with internal and external standards and procedures.
• Reduced Non-Productive Time (NPT) through risk mitigation and technical troubleshooting.
• Used correct methodology to calculate parameters and make correct design choices.
• Drove on-time and under-budget project completion by communicating data and updates regarding to project support team.
• Led or facilitated job briefs, setting to work meetings and readiness reviews.
• Consulted on engineering projects, offering mechanical perspective to different disciplines in collaborative environment.
• Analysed technical designs and prototypes at each stage of product development lifecycle.
• Offered technical evaluations and calculations to improve design processes.
• Specified system components and directed product modifications for conformance with engineering design and performance specifications.
• Crafted project documentation including work order cards, method statements, construction plans and risk assessments.
• Reviewed designs with constructive feedback to improve project outcomes.
• Implemented technical system solutions according to engineering principles.
• Generated quotations for site-based project work based on client consultation and walk-downs.
• Collaborated with engineering team to complete projects.
• Calculated tolerances and loads to optimize mechanical designs.
• Built complete system designs for (Plumbing, Fire Fighting and HVAC) applications using accurate data and iterative processes.
• Monitored project progress and identified operational concerns to limit delays and overspends.
• Worked with Revit and AutoCAD to draft assemblies, models and technical drawings and Preparing the Shop Drawings and as built Drawings.
• Recorded project spending and progress to enable performance evaluations.
• Wrote reports outlining project progress and results.
• Responsible for Follow up all Electro-mechanical System (HVAC, firefighting, Plumbing and all Electric works).
• Responsible for making design calculations for Mechanical Systems (HVAC, Firefighting and Plumbing).
• Coordinate between site work and design office work according to priority and schedules.
• Preparing the inventory of materials and request it as per approved materials.
• Checking all the services which are installed before handling over to the client to achieve high quality according to standards complying with the specifications.
• Coordinating relation with other civil and architectural department to avoid any kind of installation obstruction.
• Visually inspect pumps, valves, and all Electro-mechanical joints visually inspect components to ensure that all equipment is operating, safety systems are in place, and no unusual leaks exist.
• Solve any arising problems at the site and make coordination between other departments.
• Attend a coordination meeting between other departments to arrange work schedule depending on the priority.
• Ensure that all Mechanical and Electrical site activities are conducted under controlled conditions as per shop drawings.
• Check Purchase Order and material to ensure that Materials are properly Specification.
• Flushing and hydro test for fire protection & Plumbing systems as per Standards.
• Negotiated with vendors and service providers to control corporate expenditures.

I am working as a Head of Electro-Mechanical department and responsible for Follow up the Contractor works and confirms with specification and standards below is my task and scope of work:

• Offered technical guidance, peer review and mentorship to junior engineers.
• Supported on-time and under-budget project completion by proactively communicating challenges and updates.
• Performed monthly safety walks and escalated concerns in line with procedures.
• Prepare Requests for Information (RFI) when necessary.
• Negotiated with vendors and service providers to control corporate expenditures.
• Led project scheduling and budgeting to successfully complete engineering projects within target parameters.
• Tracked project expenses against budgets and identified cost-saving opportunities.
• Enforced project-wide compliance with internal and external standards and procedures.
• Reduced Non-Productive Time (NPT) through risk mitigation and technical troubleshooting.
• Used correct methodology to calculate parameters and make correct design choices.
• Drove on-time and under-budget project completion by communicating data and updates regarding to project support team.
• Led or facilitated job briefs, setting to work meetings and readiness reviews.
• Consulted on engineering projects, offering mechanical perspective to different disciplines in collaborative environment.
• Analysed technical designs and prototypes at each stage of product development lifecycle.
• Offered technical evaluations and calculations to improve design processes.
• Specified system components and directed product modifications for conformance with engineering design and performance specifications.
• Crafted project documentation including work order cards, method statements, construction plans and risk assessments.
• Reviewed designs with constructive feedback to improve project outcomes.
• Implemented technical system solutions according to engineering principles.
• Generated quotations for site-based project work based on client consultation and walk-downs.
• Collaborated with engineering team to complete projects.
• Calculated tolerances and loads to optimize mechanical designs.
• Built complete system designs for (Plumbing, Fire Fighting and HVAC) applications using accurate data and iterative processes.
• Monitored project progress and identified operational concerns to limit delays and overspends.
• Worked with Revit and AutoCAD to draft assemblies, models and technical drawings and Preparing the Shop Drawings and as built Drawings.
• Recorded project spending and progress to enable performance evaluations.
• Wrote reports outlining project progress and results.
• Responsible for Follow up all Electro-mechanical System (HVAC, firefighting, Plumbing and all Electric works).
• Responsible for making design calculations for Mechanical Systems (HVAC, Firefighting and Plumbing).
• Coordinate between site work and design office work according to priority and schedules.
• Preparing the inventory of materials and request it as per approved materials.
• Checking all the services which are installed before handling over to the client to achieve high quality according to standards complying with the specifications.
• Coordinating relation with other civil and architectural department to avoid any kind of installation obstruction.
• Visually inspect pumps, valves, and all Electro-mechanical joints visually inspect components to ensure that all equipment is operating, safety systems are in place, and no unusual leaks exist.
• Solve any arising problems at the site and make coordination between other departments.
• Attend a coordination meeting between other departments to arrange work schedule depending on the priority.
• Ensure that all Mechanical and Electrical site activities are conducted under controlled conditions as per shop drawings.
• Check Purchase Order and material to ensure that Materials are properly Specification.
• Flushing and hydro test for fire protection & Plumbing systems as per Standards.

I am working as a Head of Electro-Mechanical department and responsible for Follow up the Contractor works and confirms with specification and standards below is my task and scope of work:

• Offered technical guidance, peer review and mentorship to junior engineers.
• Supported on-time and under-budget project completion by proactively communicating challenges and updates.
• Performed monthly safety walks and escalated concerns in line with procedures.
• Prepare Requests for Information (RFI) when necessary.
• Led project scheduling and budgeting to successfully complete engineering projects within target parameters.
• Tracked project expenses against budgets and identified cost-saving opportunities.
• Enforced project-wide compliance with internal and external standards and procedures.
• Reduced Non-Productive Time (NPT) through risk mitigation and technical troubleshooting.
• Used correct methodology to calculate parameters and make correct design choices.
• Drove on-time and under-budget project completion by communicating data and updates regarding to project support team.
• Led or facilitated job briefs, setting to work meetings and readiness reviews.
• Consulted on engineering projects, offering mechanical perspective to different disciplines in collaborative environment.
• Analysed technical designs and prototypes at each stage of product development lifecycle.
• Offered technical evaluations and calculations to improve design processes.
• Specified system components and directed product modifications for conformance with engineering design and performance specifications.
• Crafted project documentation including work order cards, method statements, construction plans and risk assessments.
• Reviewed designs with constructive feedback to improve project outcomes.
• Implemented technical system solutions according to engineering principles.
• Generated quotations for site-based project work based on client consultation and walk-downs.
• Collaborated with engineering team to complete projects.
• Calculated tolerances and loads to optimize mechanical designs.
• Built complete system designs for (Plumbing, Fire Fighting and HVAC) applications using accurate data and iterative processes.
• Monitored project progress and identified operational concerns to limit delays and overspends.
• Worked with Revit and AutoCAD to draft assemblies, models and technical drawings and Preparing the Shop Drawings and as built Drawings.
• Recorded project spending and progress to enable performance evaluations.
• Wrote reports outlining project progress and results.
• Estimated costs, scheduling requirements and labour needs to produce engineering designs.
• Responsible for Follow up all Electro-mechanical System (HVAC, firefighting, Plumbing and all Electric works).
• Responsible for making design calculations for Mechanical Systems (HVAC, Firefighting and Plumbing).
• Coordinate between site work and design office work according to priority and schedules.
• Preparing the inventory of materials and request it as per approved materials.
• Checking all the services which are installed before handling over to the client to achieve high quality according to standards complying with the specifications.
• Coordinating relation with other civil and architectural department to avoid any kind of installation obstruction.
• Visually inspect pumps, valves, and all Electro-mechanical joints visually inspect components to ensure that all equipment is operating, safety systems are in place, and no unusual leaks exist.
• Solve any arising problems at the site and make coordination between other departments.
• Attend a coordination meeting between other departments to arrange work schedule depending on the priority.
• Ensure that all Mechanical and Electrical site activities are conducted under controlled conditions as per shop drawings.
• Check Purchase Order and material to ensure that Materials are properly Specification.
• Flushing and hydro test for fire protection & Plumbing systems as per Standards.
• Negotiated with vendors and service providers to control corporate expenditures.

I am working under Mechanical department and responsible for follow up the contractor's works and give instructions to achieve client requirement and confirms with specification and standards below is my task and scope of work:

• Coordinate between site work and design office work according to priority and schedules.
• Checking all the services which are installed before handling over to the client to achieve high quality according to standards complying with the specifications.
• Coordinating relation with other electrical, civil, and architectural department to avoid any kind of installation obstruction.
• Managing activities related to fire hydrant system and firefighting system installation, also providing progress report of all these scopes assuring all system works according to plan.
• Visually inspect pumps, valves, and all mechanical joints visually inspect components to ensure that all equipment is operating, safety systems are in place, and no unusual leaks exist.
• Solve any arising problems at the site and make coordination between other departments.
• Attend a coordination meeting between other departments to arrange work schedule depending on the priority.
• Make full assurance that the contractors follow all the method statements as agreed in the contract.
• Ensure that all Mechanical site activities are conducted under controlled conditions as per shop drawings.
• Check Purchase Order and material to ensure that Materials are properly Specification.
• Flushing and hydro test for fire protection system as per Standards.

I am working under Mechanical department and responsible for follow up the contractor's works and give instructions to achieve client requirement and confirms with specification and standards below is my task and scope of work:

• Coordinate between site work and design office work according to priority and schedules.
• Checking all the services which are installed before handling over to the client to achieve high quality according to standards complying with the specifications.
• Coordinating relation with other electrical, civil, and architectural department to avoid any kind of installation obstruction.
• Managing activities related to fire hydrant system and firefighting system installation, also providing progress report of all these scopes assuring all system works according to plan.
• Visually inspect pumps, valves, and all mechanical joints visually inspect components to ensure that all equipment is operating, safety systems are in place, and no unusual leaks exist.
• Solve any arising problems at the site and make coordination between other departments.
• Attend a coordination meeting between other departments to arrange work schedule depending on the priority.
• Make full assurance that the contractors follow all the method statements as agreed in the contract.
• Ensure that all Mechanical site activities are conducted under controlled conditions as per shop drawings.
• Check Purchase Order and material to ensure that Materials are properly Specification.
• Flushing and hydro test for fire protection system as per Standards.