Hussam Tasawar Malik

• Followed the approved ITPS for performing the inspections.
• Closely worked with Saudi Aramco Inspection Department to ensure the smooth and timely inspections.
• Pro actively informing the site team for any expected non conformance.
• Kept the traceability and document control of all the site activities.
• Coordinated with other departments to avoid any rework or inspection failure
• Performed all the inspections according to the approved procedures and SAIC.
• Collaborated with production teams to meet performance and productivity targets.
• Examined samples for conformance with agreed quality criteria.
• Utilized non-destructive testing methods for minimized waste.
• Maintained specification conformance through rigorous surveillance and monitoring.
• Used precision meters and measurement tools for accurate testing.
• Defined product quality standards and assessment criteria.
• Carried out inspections according to the approved Inspection Test Plans.
• Made sure all the construction phase is being carried out according to the Saudi Aramco Engineering Standards and approved Project Specs.
• Maintained Coating Personnel and Calibration Logs.
• Made sure the calibration off all equipment, devices and gauges are valid as described in Project Quality Plan

• Arranged the qualification of Coating Personnel from Saudi Aramco.
• Prepared all the docs for qualification in accordance with the requirements of SAEP-316.
• Reviewed the procedures for final submission to Saudi Aramco for Approval.
• Raised the technical queries following the site conditions and requirements.
• Performed pre blasting inspections.
• Kept the record and traceability of all the quality test reports and check lists.
• Performed surface preparation, in process and final inspections following the Saudi Aramco Checklists, SSPC,ASTM and ISO requirements.

• Executed thorough Root Cause investigations, producing detailed non-conformance reports to evaluate and rectify production issues.
• Performed accurate physical and visual inspections of Spools, fittings and Pipe Support according to inspection plans to guarantee cohesive outputs.
• Verified supplier certificates and generated final conformance certificates before sign-off and shipping.
• Inspected raw materials against quality and operations processes such as calibration and verification of batch records.
• Closely monitored the storage area.
• Used precision meters and measurement tools for accurate testing.
• Tested and classified materials according to detailed specifications.
• Recorded accurate test data for thorough, reliable reference.
• Ran product conformance testing with attention to quality.

Coordinated with quality team for arranging the inspections.

Maintained records of all the production activities.

Coordinated with the NDT team for clearance prior to blasting activities.

Performed all the activities according to approved procedures and standards.

Training the Coating personnel following the requirements of SAEP-316.

Arranged all the material (Abrasives, Coating Materials and Spare Parts of Equipment) proactively to avoid any delay in production.

Planned the production according to the needs of the Project.

Calibrated all the equipment, gauges and devices according to the requirements of PQP.

Arranged daily TBT to ensure the safe, accountable and healthy working environment.

Closely worked with the quality team to avoid any non conformance resulting in rework.

• Performed accurate physical and visual inspections of raw materials, components and subassemblies according to inspection plans to guarantee cohesive outputs.
• Ran product conformance testing with attention to quality.
• Recorded accurate test data for thorough, reliable reference.
• Prepared the procedure for client approval prior to start of work.
• Performed visual and manual inspections according to International Standards.
• Prepared the reports for all the inspections and tests performed.

• Monitored the activities and supporting systems to ensure their compliance with all institutional and regulatory requirements
• Approved incoming materials by confirming specifications and taking measurement tests.
• Kept equipment operating and in good condition by performing quality checks and calling in for repairs when needed.
• Coached and mentored junior employees.
• Applied engineering expertise toward development and optimization of Coating Life.
• Implemented policies and devices to improve workplace safety.
• Worked with production teams to facilitate smooth transition from design and testing to full-scale manufacturing.
• Investigated design failures in field to determine necessary corrections in future iterations.
• Examined project plans and locations to identify and mitigate potential hazards.
• Calculated values for structural engineering failures and determined how to safely handle affected zones.

• Reviewed and checked applicator certification, verification of blasting & painting equipment condition and checked certificates of instruments, abrasive material and painting / coating material
• Control of Calibration of Inspection Test and measuring equipment
• Maintain daily weather conditions records (weather conditions logbook)
• Maintain a Daily logbook & Inspection Log reporting on a weekly basis
• Verification and visual inspection for paint abrasive materials
• Storage of paint & coating material ensure that as per Saudi Aramco approved data sheets and manufacturer instructions
• Monitor weather conditions, air temperature and surface temperature prior to blasting and painting activities
• Page 5 Inspection of Surfaces for Oil, Grease and other contaminants prior to abrasive blasting on the internal and external surfaces of Crude and Utilities
• Adhesion tests using dolly, cross hatch and cross cut equipment for paint films
• Test of paint measurement DFT, WFT, Dew Point, Relative

Humidity, Rust Grade

• Adhesion tests ( ‘V' cut, Cross cut, Dolly, Hydraulic adhesion test equipment) Holiday Detector and Wet Sponge Pinhole Detector
• Final visual inspection prior to holiday testing for any sags, runs and other coating faults
• Inspection for Safety color coding and stenciling of identification on
• Equipment, Piping or Structures
• Performing inspection as per job specifications and International Quality
• Standards like BGAS, SSPC
• Dry abrasive blasting, new and maintenance painting on all components and structure working on hot duty surfaces
• Consumption material used complies with the pre-set codes, the Specification required and practice & Paint Manufacturer/Suppliers Recommendations
• Inspection underground coated and wrapped pipe and ensured these conform to the project specifications and related codes and practices
• Identify non-conformances and ensured appropriate corrective action is taken
• Ensuring that adequate precautions are taken to protect the works from weather and other hazards during application of paint

• Tested and classified materials according to detailed specifications.
• Examined samples for conformance with agreed quality criteria.
• Checked raw materials' quality met manufacturing requirements.
• Kept databases updated with relevant technical documentation and reports.
• Reported production issues for swift remedy, eliminating operational disruptions.