Jamal Abdullah Al-Sufyani

• Evaluated the competency of operation staff benchmarking with SABIC affiliates, which supported developing road map for competency improvement plan
• Conducted operation assessment on the effectiveness of operator field round up that identified more than 25 gaps and generated over 35 recommendations.

• Reduced transporter EHSS incidents by more than 50% from last year 2018
• Achieving new method of shipping company product, which has add premium value to the product
• Lead PH project for streaming new product as part of the company covering both site and port
• Introduced new method for loading bulk container that reduced handling cost by 8 %.

• Improve specific consumption for feed, this attributed in financial gain of 2.27 MMSAR
• Led \benchmark study with one of SABIC affiliate that resulted in over 18 areas benchmarked and helped the company to incorporate the required change. These areas were but not limited to Manpower Distribution, Software Usage, Monthly Monitoring Tools, Inventory monitoring… etc
• Performed SF4 RG boiler high outlet temperature assessment that resulted in provide “Out of the Box” recommendation to perform steaming that saved total 9900 MT of steam.

• Study and evaluated over 93 e-MOC's packages through reviewing PID's, analyzing Isometric drawing, and evaluate engineering technical reports plus facilitated e-MOC's flow process by leading PHA and PSSR meetings and ensuring implementation of PHA and PSSR recommendations
• Recognized & appreciated by company senior management staff for the leadership & execution by leading +4M SAR project of decommission & commission 20,000 MT ammonia storage tank with cost saving of 1.5M SAR through cutting down the cost of nitrogen purging by using existing plant nitrogen grid
• Certified RCA team leader with an experience of carry out more than six RCA's investigations including one “A” category incident that successfully generated more than 40 recommendations to mitigate and prevent repeating the failures within the company
• Certified PHA team leader with an experience of carry out PHA revalidation study for IBB utilities complex, which was conducted for two weeks reviewing pervious PHA study including reviewing all nodes and going though implemented e-MOC and successfully generated more than 35 recommendations to proactively close the gaps and ensure operating the plant safely
• duration by two days which equivalent 3000 MT

— Expert in process parameters analysis with over 200 process parameters daily analyzed through Exaquantum (PIS) tracking which provided excellent optimization to plant owners and assisted in boost up production rate by 3% yearly on normal operation load.
— Solid experience in conferring with vendors, technology providers, and management personnel regarding purchases, procedures, product specifications, manufacturing capabilities, and project status.
— Reviewed production schedules, engineering specifications, ordered, and related information to obtain knowledge of manufacturing methods, procedures, and activities
— Nominated by SMT to participate new company mega project SAFCO 5 “Urea Stand Alone” HAZOP that conducted in Italy with outstanding outcome that generated more than 200 recommendations.
— More than 2 years experienced in technical service and process engineering, engaged in the engineering, feasibility study and evaluation of technical issues related to debottlenecking, equipments evaluation such as pumps, turbines, compressors, control valves.
— Held a position as Superintendent and Manager Acting on numerous occasions, which engaged me with all levels of management teams to drive consensus, collaboration and forward momentum toward the completion of organization milestones and programs and the attainment of company goals.
— Active member of SABIC Reliability Recognition Program (SRRP) committee giving full support to SRRP requirements inside the company which lead to establish solid platform for reliability methods such as RCM/RBI/RIS and RCA which recognize several times by company leaders.

• — Strong exposure to American Petroleum Institute (API) Specification for line pipe by leading over 20 awareness sessions to company staff to increase knowledge throughout the company.
• Inspected and evaluated over 250 pipe on daily production capacity through supporting the operation shift staff in each stage of the production line starting with preliminarily inspection stages and ending with final inspection stages including storage & packing.
• Performing both destructive and None Destructive Tests Such Tensile Test, Hardness, and Charpy Impact including metallographic microscope analysis and give technically feedback to operation staff.
• Internationally certified NDT Level ІІ Radiographic Interpreter (Welds).— Strong exposure to American Petroleum Institute (API) Specification for line pipe by leading over 20 awareness sessions to company staff to increase knowledge throughout the company.
• Inspected and evaluated over 250 pipe on daily production capacity through supporting the operation shift staff in each stage of the production line starting with preliminarily inspection stages and ending with final inspection stages including storage & packing.
• Performing both destructive and None Destructive Tests Such Tensile Test, Hardness, and Charpy Impact including metallographic microscope analysis and give technically feedback to operation staff.
• Internationally certified NDT Level ІІ Radiographic Interpreter (Welds).

• Trained and exposed to running different logging tools such as Gamma Ray, Sonic, and Induction.
• Participated in performed both on-land and offshore jobs.
• Attended Logging school (PEPTEC) in Scotland.