Partial Discharge test and site location From HAFELY
Supervised H.V testing cage (design, establishing, and maintaining) with Haefely team, operation up to 700kV, pinpointing troubleshooting of H.V testing equipment.
Process capabilities in a Six Sigma project Cp & Cpk and KPI.
Have wide experience in partial discharge patterns and trends at low frequency for MV/HV/EHV cables, High frequency, PDIV & PDEV.
Internal Training courses in cable design , Polymer material, specifications and composition for (Inner, Outer semi conducting shields) , many types of PVC like (Type9, SR OR FR ANTITERMITE) , LSZH and all types of PE (LDPE, MDPE, HDPE and LLDPE) and XLPE for (LV, MV and H.V cables)
Overview
24
24
years of professional experience
Work history
• Director, Production Process & Technology
www.saudicable.com
Jeddah, Mecca Region
03.2017 - Current
Direct a team of Process and specification engineers for LV, MV, HV, EHV & TCP cables for preparation and timely submission of cost effective cable designs which meet the technical customer requirements and lowest cost expectations.
Direct Quality Control for LV, MV, HV, EHV & Instrumentation cables.
Direct Quality Management Systems, policies, procedures with wide experience and knowledge of Assessment In Auditing with corrective and preventive action plan PDCA, Six sigma , re-engineering / re-processing
Direct R&D “ Material Development, New Products New Technology and Developing existing products“
Specialized in Power Cables design, Processing, Manufacturing, Quality and R&D
Coaching the developing and implementing of Process objectives, products quality
improvement, and ensure regulatory compliance.
Direct all related activities to achieve the targets set for business development.
Lead the development of products to introduce new cable types to the market.
Languages
English
Advanced
Accomplishments
Exploring / supervised of new products and qualification for new type of cables like solar cable, CP- PVDF cables, OPGW and Wind Rubber Cables.
Re-qualification for all type of cables (fiber optical up-to HV cable 132kV) from international independent testing labs. Like (UL, KEMA, CESI …etc.) as per biggest wide utilities company in GCC (SEC, NGsa, ARAMCO, DEWA and OTC OMAN) at Saudicablecompany.
Modified a special kind of PVC –LS raw material within Saudi Cable Company Facilities for outer jacket of instrumentation cables as per ARAMCO specs. as a replacement for England supplier which had been successfully passed for all tests are required by international standards of UL. The cost reduction up to 2.7 MSAR.
Cooperation with SABIC and modified an alternative grade of HDPE material which exporting from Borouge at UAE. The cost reduction up 3.5 MSAR at SaudiCableCompany.
<ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group<ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group