Microsoft Office
Leendert Pieter van Beveren
Process Safety Specialist
Jubail,Eastern Province
Summary
Introduction A very experienced person in Operation, Engineering and Process Safety in international environments with total of 39 years of experience. Motivated and result drive, always deliver on set targets. I ‘m innovative, always looking for improvements of currents systems/procedures or ways of work. A team player, motivating others and integrity is one of my core values. Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Overview
39
39
years of professional experience
22
22
years of post-secondary education
5
5
Certifications
5
5
Languages
Work History
Process Safety Specialist Saudi
Kayan
Jubail
2016.01 - 2022.01
- Implement CCPS Risk Based Process Safety in Saudi Kayan
- Developed and executing training on different Process Safety topics in Saudi Kayan
- Developed and implement Process Safety Dashboard
- SIL/SIS – Dow FEI/CEI))
- Developed and implemented performance improvement strategies and plans to promote continuous improvement.
- Performed duties in accordance with applicable standards, policies and regulatory guidelines to promote safe Process Safety working environment.
Technology Process Specialist
Bis Phenol Acetone (BPA) plant, Kayan Jubail KSA
Jubail
2010.01 - 2016.01
- 6 Months assignment with PMT (Project Management Team) to solve issued with EPC regarding Phenolics (Cumene, Phenol and BPA plants)
- Leading final closed out of HAZOP recommendations for Phenolics ( Cumene, Phenol and BPA)
- Re-assessment of SIL/ LOPA analysis with EPC contractor
- Leading punch list activities for operations and maintenance
- Leading development of commissioning and start up manuals for BPA
- Leading development of Standard Operating Procedures for Phenolics ( Cumene, Phenol and BPA plants)
- Commission Operation Leader for BPA plant
- Startup Leader for BPA plant
- Training of operators on BPA process (Badger Licenses)
- Developed and implemented several (work) procedures with regards to daily operations
- Implemented several improvement project in BPA plant
- Leader of performance test run for BPA
- Leader for Lenders test run BPA
Process Safety Management Specialist
GE Plastics/SABIC IP
Bergen op Zoom
2000.03 - 2010.01
- Coordinate PSM activities for Site according OSHA 1910.119
- Execute/review SIL/SIS requirements for chemical plants
- Management of Change process and European Seveso II regulation owner
- Draft and review HSE procedures
- Involved in QRA’s with third party
- Incident investigation Leader level B/C for Bergen op Zoom Site
- Business Auditor HSE Europe for Corporate Health and Safety Frame work (OSHA 18001) and Process Safety Management Audits
- PHOA/ HAZOP Study Leader for Site
- Implementing Change Management according QS 9000
- Reviewing work plans and self assessments
- Execute Training on PSM/H&SF elements including ISO 14001
- Prepare BoW-Tie diagrams for Risk scenarios
- ( Scenario based auditing)
- Scenario Based auditing Chlorine and Phosgene plants
- ATEX137 implementation for site
- Functional owner and developer MOC software for Bergen op Zoom site.
Shift leader Chlorine
GE Plastics
Bergen op Zoom
1999.05 - 2000.03
- Manage shift of 11 people regarding daily operations
- Draft, review, plant procedures and work instructions
- Obtain Safety, Health and Environmental standards according procedures and policies
- Draft and review appraisals operators.
BPA Production Specialist
GE Plastics Spain S.A
Cartagena, Spain
1995.09 - 1999.05
- Detailed Engineering Madrid LX BPA plant
- Operations specialist for conducting PHOA (HAZOP) studies
- Engineering flow diagram review for as build releases
- Leading and implement model reviews for LX project
- Review of equipment datasheets
- Drafting, preparing, commissioning and start up schedules and procedure
- Commissioning and Start up LX BPA plant Cartagena Site
- Lead preparing detailed commissioning and start up procedures
- Maintain commissioning and start up schedule
- Training people in executing punch lists
- Execute detailed plant training to start up and operate the plant
- Vessel, equipment inspections for acceptance by GE Operations
- Follow up daily activities regarding turn over systems
- Leading Chemical run and startup of the BPA plant.
Senior Chemical Operator
GE Plastics
Bergen op Zoom
1989.01 - 1995.09
- Onsite training at Mount Vernon facility (, , USA.)
- Translating, drafting procedures for new facility
- Commissioning and Start up of facility
- Factory acceptance test for DCS system in Germany
- Lead, coordinate operational plant shutdowns
- Operated chemical processing equipment successfully while adhering to company standards.
Chemical Operator Carbon
GE Plastics
Bergen op Zoom
1984.03 - 1989.01
- Operate and control of Utilities and Waste water Treatment plant
- Performed duties in accordance with applicable standards, policies and regulatory guidelines to promote safe working environment.
- Operation Shutdown/Turn around coordinator
- Operate and maintain daily activities with regards to EHS, operations and maintenance
- Operate emergency control center
- Commissioning an start up of Carbon Monoxide plant
- Commissioning and start up Co-Generation unit ( 42 Mwatt turbine)
Operator Lexan Finishing
GE Plastics
Bergen op Zoom
1983.03 - 1984.03
- Operate and maintain daily activities with regards to EHS, operations and maintenance
- Lead, coordinate operational plant shutdowns, Finish essays on all departments within Finishing plants to graduate from VAPRO A and B
- Operate extrusion lines within the compounding facility
Education
Associate of Business Administration -
Gemeentelijke MAVO School
Tholen 1974.01 - 1978.01
Mechanical Technician -
Technical College
Sint Maartensdijk 1978.08 - 1980.05
Associate of Applied Science - Chemical Engineering
Medium Level Technical College
Bergen Op Zoom 1981.03 - 1983.03
No Degree - Fire Fighter/Emergency Responder
NIBRA
Bergen Op Zoom 1983.07 - 1995.01
Associate of Science - Environmental Economics
Open University
Middelburg 1991.01 - 1993.04
No Degree - Process Safety
University of Delft/TNODust Explosion, ISMA
Delft 2002.05 - 2002.05
No Degree - Human Safety Behavior
SABIC L&D
Jubail 2013.10 - 2013.10
Skills
Process safety
Commissioning and Start Up Petro chemica units
Risk Assessments and PHA
Safety processes and oversight
Safety process analysis
Safety protocols and policies
Educational process knowledge
Audit processes
Accomplishments
- Implement the Center for Chemical Process Safety Risk Based Process Safety elements (20) in Saudi Kayan
- Developed and executed Process Safety training in SABIC for front line supervisors in Jubail and Yanbu
- Developed and implemented Process Safety dashboard in Saudi Kayan.
- Developed and roll out MOC electronic platform in GE Plastic Bergen op Zoom.
- Successfully lead the commissioning and start up of Bi-Phenol-Acetone units in Cartagena and Saudi Kayan
Software
SAP
Share Point
Certification
PHA Leader (DNV and Haward)
Interests
Fishing
Swimming
Reading
Soccer
Environmental topics
Timeline
Process Safety Specialist Saudi
Kayan
2016.01 - 2022.01
No Degree - Human Safety Behavior
SABIC L&D
2013.10 - 2013.10
Technology Process Specialist
Bis Phenol Acetone (BPA) plant, Kayan Jubail KSA
2010.01 - 2016.01
Functional Safety Engineer (TUV)
2007-06
No Degree - Process Safety
University of Delft/TNODust Explosion, ISMA
2002.05 - 2002.05
PHA Leader (DNV and Haward)
2002-02
Audit Leader (Lloyds)
2001-12
Process Safety Management Specialist
GE Plastics/SABIC IP
2000.03 - 2010.01
Shift leader Chlorine
GE Plastics
1999.05 - 2000.03
3D model review ( Intergraph)
1996-08
BPA Production Specialist
GE Plastics Spain S.A
1995.09 - 1999.05
Mentor ( University of Eindhoven)
1991-09
Associate of Science - Environmental Economics
Open University
1991.01 - 1993.04
Senior Chemical Operator
GE Plastics
1989.01 - 1995.09
Chemical Operator Carbon
GE Plastics
1984.03 - 1989.01
No Degree - Fire Fighter/Emergency Responder
NIBRA
1983.07 - 1995.01
Operator Lexan Finishing
GE Plastics
1983.03 - 1984.03
Associate of Applied Science - Chemical Engineering
Medium Level Technical College
1981.03 - 1983.03
Mechanical Technician -
Technical College
1978.08 - 1980.05
Associate of Business Administration -
Gemeentelijke MAVO School
1974.01 - 1978.01