Mohamed Rasmy

A contract to provide engineering consulting services to the Holy Capital Municipality, Department of Transportation and Traffic Engineering

• Collaborated with coworkers to determine workflows and delegate traffic management duties.
• Coordinated planning for traffic systems.
• Patrolled assigned areas to verify safety and efficiency within pedestrian and vehicle traffic.
• Coordinated contractors, subcontractors and laborers to deliver on projects.
• Resolved complex issues, applying troubleshooting and critical thinking to address numerous technical solutions.
• Documented technical specifications and requirements in alignment with company-established protocols.
• Maintained updated knowledge of industry advancements to implement emerging solutions.
• Used precise calculations to design internal components of optical systems.
• Planned and designed site layouts from concept to completion using AutoCAD, Civil 3D and Vehicle Tracking.
• Redesign modifying the road's geometry design according to the results of the thorough traffic study.
• resolve crucial (black)points by determining the optimal geometric design solution based on traffic analysis.

Accomplished Projects:

• Al Masjd Al-Haram Road
• Elnwarya Gas station
• Ramp Entrance to the tunnel of the third ring road
• Al-Madinah Road
• Abdelkader Koshak Road
• Ibrahem El-Khalel Road
• Abdullah ibn Abbas Road
• Ibrahem El gafaly Street
• El Hedaya Street
• Prince Mohamed ibn Salman Bridge infront of Car booking
• Goarana Road at Almasarat district
• Asmaa Zat al netaqin Road
• Fatma Alzahra School (road and intersections safety )
• intersection infront of chamber of commerce
• Al Akishia Uturns
• Al Syedah Aisha Um Elmoamneen Road

Main Office, Jeddah

• Abhor Park –Jeddah
• Awtar Company Buildings – Jeddah
• Proposal For Intersection Between Fourth Ring Road And Abdel Hameed Koshak Roads - Hamat Company – Mecca Park Mall
• Industrial City - Bahra – Mecca
• Andalus School – Jeddah
• Manar Elbonnyan Schools – Jeddah
• Prince Nayef Road – Jeddah
• Jeddah Theater
• Boghdadia Mall – Jeddah
• Drive Thru – Al Malqa District – Riyadh
• Drive Thru – Al Munsiyah District – Riyadh
• Drive Thru – Al Nargis District – Riyadh
• Drive Thru – Al Hazm District – Riyadh
• Commercial Building – Al azizia District – Riyadh
• Starbucks Group Drive Thru – Al Dar Albydaa District – Riyadh
• Typical Service Station Ingress / Egress Details On Divided Highways-King Faisal Road- Makkah
• Drive Thru – Zahra Laban District – Riyadh
• Abtal Charitable Society Building for Orphans – Rabwah Makkah - Makkah
• Alrajhi Mall- Al Nargis District – Riyadh
• Drive Thru – Al Yarmouk District – Riyadh
• Drive Thru – Al azizia District – Riyadh
• AlRyan Road – Al rayan District- Makkah

• Designed And Drafted All Elements Of Road Networks For The Assigned Power System Station Projects.
• Prepared The Required Technical Documents, Such As, Bill Of Quantities, Technical Specifications, Clarifications And Design Reports.

Examples Of The Accomplished Projects:

• Aweer Power Station –Dubai- UAE: Employer is DEWA (Dubai Electricity & Water Authority)

Detailed Engineering Design For Construction Of The Infrastructure

Of Urban Network Including Full Geometric Design, Profiles Design,

Grading And Shop Drawings Preparation.

• Layyah Power Station – Sharjah-UAE: Employer Is DEWA (Dubai Electricity & Water Authority)

Tasks: Design Profiles, Roads Base Planning, Grading, Pavement

Structural Design And Materials Quantities Calculation.

• Iraq Substations - (Maysan-Al Mouthana - Shatra- Shat Alarab-New Babil) Employer Is MOE (Ministry Of Electricity).

Tasks: Produce Drawings Issued For Approval And Construction

Includes (Roads Base Plan, Design Profiles, Grading, Spot Levels

Plan And Materials Quantities Calculation.

• Elbanna Farm Solar System Project – Wadi Elnatroon-Egypt: Tasks: Produce Drawings Issued For Approval And Construction Includes (Roads Base Plan, Design Profiles, Grading, Spot Levels Plan And Materials Quantities Calculation.
• Arab El Madabegh Waste Watet Treatement Plant Project – Assuit-Egypt:

Tasks: Produce Drawings Issued For Approval And Construction

Includes (Roads Base Plan, Design Profiles, Grading, Spot Levels

Plan And Materials Quantities Calculation.

• Pumping Stations (Al-Hammam City – Mostakbal Misr ) El Dabaa

Cooridor-Egypt: The Stations Are Part Of A Mega Project For The

Collection And Treatment Of Sewage And Agricultural Drainage

Owner:  Ministry Of Water Resources And Irrigation, Egypt.

Client:  Egyptian Armed Forces Engineering Authority.

Consultant:  Hydro. Envir. & Infrastr. Studies

Tasks: Produce Drawings Issued For Approval And Construction

Includes (Roads Base Plan, Design Profiles, Grading, Spot Levels

Plan, Pavement Structural Design And Materials Quantities

Calculation.

Tendering Documentation For Many Projects:

Tasks: Estimate And Produce Roads BOQ Including Detailed Description Items Of Materials And Quantities. Produce Preliminary Plan Layout And Coordinate With Other Disciplines.

Tender Projects:

• Jafurah Cogeneration Plant (JCP)- KSA (The Primary Objective Of The Jafurah Cogeneration Plant (JCP) IS To Meet The Jafurah Gas Plant (JFGP) Heat Demand By Producing Steam)

• Derna – Libya ( Simple Cycle (Open Cycle) Gas Turbine Power Station Where Combustion Turbine Generators (Ctgs) To Generate Total 900-1000 MW Gross At ISO Condition.)

• Alba Power Station– Bahrain (Construction Of ALBA Power Station 5 Block 4).

• Matrouh - Egypt (Supply And Erection Of East Matrouh Seawater Reverse Osmosis (SWRO) Desalination Plant 65,000 M3 /Day Extendable To 130,000 M3/Day).

• New Spark 115kv- Ksa(Construction Of New 115/33kv Substation At Spark &Associated UG Cabling Works)

• K-Station – Dubai – Uae (New Jebel Ali Power Station ‘K’ Phase III) • Al Arish Simple Cycle Power Plant – Egypt (Consists Of Two (2) 125 MW (Nominal ISO) Outdoor Combustion Turbine Generators (Ctgs).

• DOHA WEST- KUWAIT (Supply And Erection With O & M Services Of Doha SWRO Desalination Plant With Recarbonation System) • Pp-10 – Riyadh- Ksa (Conversion Of Riyadh PP#10 Combined Cycle Power Plant- (20) GE Frame 7-Gas Turbines To Gas Firing As Main Fuel).

• Sukhandarya-Uzbekistan (Supply And Construction Of The Plant That Includes The Following Major Components And Services (Two (2) Gas Turbine Sets, Two (2) Heat Recovery Steam Generators, One (1) Steam Turbine Set, One (1) Air-Cooled Condenser, Monitoring And Control Systems, Auxiliary Systems, Electrical Equipment And Installations, Civil And Construction Work Including Preliminary Design And Estimate BOQ For Roads And Site Grading And Provide Many Alternative Roads Plannings For The Plant).

• Tabuk-Ksa (Construction Of New 132/13.8kv Substation For Taimah Iskan Grant Scheme Project In Tabuk)

• Madinah – Ksa (Construction Of Madinah Istp 110/13.8kv Substation)

• Nspo Manmade Fibers Factory-Egypt (Polyester Fiber Plant (900 Ton/Day) Al Ain El Sokhna) NEW CAIRO – EGYPT (New Cairo City Raw Water Boosters(2,3,4))

• Misfa – Oman (Development Of The Misfah STP Treatment Plant Through A Public Private Partnership)

• Jubail-Ksa (Development Of A New Co generation (Power And Steam) Facility With A Capacity Of Approximately 450 MW (Power) And 700 Tones Per Hour (Steam) As A New Project For An Existing Project Of Saudi Petrochemical Company)

• Iraq Substations (Iraq High Tension Projects 132/33/11/6.6 Kv Gis Substations)

• Iraq 132-33 Kv – Iraq( Design, Engineering, Procurement, Construction And Operation Of 2x132/33 Kv Substations For PV Power Plant).

• Designed And Drafted All Elements Of Road Networks For The Assigned Projects

• Implemented The Geometric Design Of Junctions And Grade Separation Structures; Including Modern Roundabouts And U-Turns

• Prepared The Required Technical Documents, Such As, Bills Of Quantities, Specifications And Design Reports Proposed And Designed Solutions To Improve Accessibility Within Road Networks

Examples Of The Accomplished Projects:

• Furniture City In Damietta: Detailed Engineering Design For Construction Of The Infrastructure Of Urban Network With Area (2 Million M2) Including Full Geometric Design, Profiles Design, Grading And Shop Drawing Drawings Preparation

• Egyptian Social Housing In Dahshour-6 October City: Detailed Design Of The Road Networks And Shop Drawing Preparation Of The Infrastructure Of Urban Network With Area (3 Million M2) Including Geometric Design Of Junctions And At-Grade Separation Structures; Including Modern Roundabouts And Intersections

• The New Administrative Capital: Including (90 North, 90 South And

North Bin Zayed ) Roads Shop Drawing Preparation Of Designed

Road

• 194 Buildings – 6 October City: Produce Full Shop Drawing Of Roads As (Spot Elevations, Cross Sections , Intersections Grading, Parking Lots Grading, Material Quantities And Setting Out)
• Tag City (Create Swept Path Using Auto-Turn Software For Parking).
• Galala City: Create And Design Roads Surface Of As Built Survey, Grading And Link Data With Storm And Drainage Team.
• R3 Zone (New Capital-Cairo): Redesign Profiles, Produce Shop Drawing And Construction Drawings As (Cross Sections, Spot Elevation And Intersection Grading)
• Mostakbal City –Cairo: Design Roads Surfaces And Link Data With Storm And Drainage Team

AL RAED Consultant Is A Multidisciplinary Consulting Engineering Firm In Egypt Specialized In Infrastructure Highways and Bridges Projects.

• Designed And Drafted All Elements Of Road Networks For The Assigned Projects

• Implemented The Geometric Design Of Junctions, Interchanges And Grade Separation Structures; Including Modern Roundabouts, Elevated U-Turns, Full Cloverleaf And Single Point Interchange

• Carried Out The Design Tasks Of Upgrading Existing Highways; Including The Production Of The Required Profiles, Demolition Plans, Intersections Grading Plans, Other Technical Drawings And Reports

• Conducted The Design And Draft Of Earth Grading Plans. In Addition To Aligning And Determining The Locations And Profiles Of Drainage Channels And Sideway Ditches

• Calculated Earthworks Quantities For The Designed Roads And Grading Works

Examples Of The Accomplished Projects:

• 6 Th Of October City Elfayoum Service Road, Cairo, Egypt: Full Design (Geometric Design, Profiles, Civil 3d Model And Shop Drawing Details) For 12 Km Highway Including The Design For 3 Interchanges Along The Highway (1 Ramp And 2 Elevated U-Turns).
• Dahshour Road, Cairo, Egypt: Full Design And Shop Drawing Details For 20 Km Of Cairo-Suez Road Including The Design For Interchanges Along The Road (1 Bridge And 2 U Turn)

EGEC Is A Multi-Disciplinary Engineering Consultancy Firm In The Areas Of Buildings And Facilities, Urban Development And Integrated Infrastructure, Water And Environment, And Transportation. Tasks : Provided Design and Drafting Services of the Proposed Highways, Road Networks and the Access and Interna Roads Of Several Mega Projects. This Includes the Production of Plans, Profiles, Cross Sections and Pavement Details Drawings.

Examples of The Accomplished Projects:

• Wadi El Dawaser, Saudi Arabia: Detailed Design of the Road Network In The New Residential Development of Wadi El Dawaser Including Geometric Design, Profiles Design, Grading, Signs & Marking for an Urban Network of 8 Million Sq.m
• Tama Road, Saudi Arabia: Detailed Design for the Upgrade and Widening Of TAMA Road in Yanbu Industrial City.
• Oqlet Elsoqoor, Saudi Arabia: Detailed Design of the Road Network In The New Residential Development of Oqlet Elsoqoor Including Geometric Design, Profiles Design, Grading, Signs & Marking for an Urban Network.
• Mezneb, Saudi Arabia: Detailed Design of the Road Network In The New Residential Development of Mezneb Including Geometric Design, Profiles Design, Grading, Signs & Marking for an Urban Network.