Mohammad Abdul Shahrukh

• Conduct inspection's for LOTS, COM, CIS, SIG, RST, DWE Site Configuration With LOTS
• Verification of corrective action's made by construction team for a violation.
• Perform daily inspection as per approved inspection & test plan and prepare inspection reports.
• Prepare and submit inspection logs weekly basis.
• Prepare daily inspection reports and submit to concerned parties.

· Prepare any other section-related reports and documentation.

• Ensure that all the work performed by the subcontactor meets project specifications, approved drawings and international codes.

· Coordinate directly with the QA/QC Manger and Project manager to prepare the monthly progressive report

· Interacting with the client and sub-contractors for the submission and approval of the documents

· Implements the new document control procedures to maintain a smooth workflow.

· Document management using EDMS (ACONEX) used for the Document such as drawings, vendor data, data sheet, correspondence etc.

· Manage all the technical documents for the relevant project in terms of revision, submission, distribution and follow up

· Manage incoming and outgoing documents, memorandum, correspondences

· Updating and making sure all the shop, as built and red marks drawings are distributed to construction team with latest revision

· Prepare and follow up with RFI, MIR, NCR, Civil Dossiers, ITP, Drawings etc. for the final approval and forward to the relevant engineer once commented by the client

· Information management and reporting.

· Organizing the document physically and digitally to make sure the document is easily accessible

· Preparing transmittals for submitting the documents,

· Preparing the KPI in excel after receiving all documents from lots.

· Preparing the PPT for management presentation.

· Preparing WIR for site inspection.

• Review the quality documents of Quality Manual, ITP/PROCEDURE/ WPS and Project Specification
• Review the Mill test certificates, Materials Traceability, NDT procedures and NDT qualification records for the projects assigned
• Preparing the documents for Fit-up and welding report
• Implementing all Project related documents and Monitoring during Fabrication and Erection
• Guiding welder before starting weld and explaining the WPS, Preheat requirements of P1, P11, P22, and P91 Materials
• Monitoring the welder during welding parameter, like Interpass temperature as per WPS
• Monitoring during PWHT is carried out as per Procedure and reviewing the Chart after completion
• Familiar with HRSG , GTG (Diverter Damper, By-pass duct, guillotine blade, inlet transition cone, casing panel, modules, main stack Air filter, Inlet plenum, Exhaust Duct, Turbine, Enclosure, Expansion joint)
• Inspection installation for (IP, LP, HP) steam drums, Vessels, Columns, main stack, Tanks and Spading & de spading activities
• Inspection for repairing done and change the gland packing and plant preventive maintenance of static equipment's
• Inspection for the hydro test by providing necessary blinds and venting arrangements
• Inspection for civil grouting activities, inspection for insulation check the heat flow insulation layers in steady state
• Inspection to check the insulation thickness shall be chosen in such a way that a heat loss of 230 watts/m square is not exceeded

• Inspection for Lots, COM, CIS, SIG, RST, DWE Site Configuration Inspection With the lots and working with client Corrective Action plan (Cap) As per daily activity
• Support the section manager and do work with full responsibility
• Routine tasks including gathering of information and preparation of documents and reports as required
• The files and records of all Section-related documents and consolidate them on Project SharePoint
• Prepare any other section-related reports and documentation
• Ensure that all documentation meets the quality standard of the project
• Coordinate directly with the QA/QC Manger and Project manager to prepare the monthly progressive report
• Interacting with the client and sub-contractors for the submission and approval of the documents
• Implements the new document control procedures to maintain a smooth workflow
• Document management using EDMS (ACONEX) used for the Document such as drawings, vendor data, data sheet, correspondence etc
• Manage all the technical documents for the relevant project in terms of revision, submission, distribution and follow up
• Manage incoming and outgoing documents, memorandum, correspondences
• Updating and making sure all the shop, as built and red marks drawings are distributed to construction team with latest revision
• Prepare and follow up with RFI, MIR, NCR, Civil Dossiers, ITP, Drawings etc
• For the final approval and forward to the relevant engineer once commented by the client
• Information management and reporting
• Organizing the document physically and digitally to make sure the document is easily accessible
• Preparing transmittals for submitting the documents
• Preparing the KPI in excel after receiving all documents from lots
• Preparing the PPT for management presentation
• Preparing WIR for site inspection

• Performing shunting of trains with-in stabling, heavy maintenance, light maintenance, manual wash plant, P-Way, Lifting track, delivery track areas
• Going through the test procedures and providing adequate/appropriate results timely as per the test leader requirements
• Performed RST Traction- Braking, Stress, and Load test with different load
• Participated in on board routine tests carousel and trail runs
• Categorizing and prioritizing works according to the test leader requirements
• Monitoring day-to-day activities, developing safety procedures, and imparting the same to all the team
• Generate reports and analyzing team performance, impart trainings if required
• Basic Trouble shooting of trains (RST-SIG), Knowledge on Train onboard equipment, safety switches, circuit breakers, safety loops and wayside equipment
• Competent to drive battery shunter and IMV vehicle
• Coupling of trains and performing rescue operations
• Operation and Troubleshooting of Platform Screen Doors (PSD)

• Company Overview: Saudi Aramco
• Review the quality documents of Quality Manual, ITP/PROCEDURE/ WPS and Project Specification
• Review the Mill test certificates, Materials Traceability, NDT procedures and NDT qualification on records for the projects assigned
• Preparing the documents for Fit-up and welding report
• Implementing all Project related documents and Monitoring during Fabrication and Erection
• Guiding welder before starting weld and explaining the WPS, Preheat requirements of P1, P11, P22, and P91 Materials
• Monitoring the welder during welding parameter, like Interpass temperature as per WPS
• Monitoring during PWHT is carried out as per Procedure and reviewing the Chart after Completion
• Inspection installation for (IP, LP, HP) steam drums, Vessels, Columns, main stack Tanks and Spading & de spading activities
• Inspection for repairing done and change the gland packing and plant preventive maintenance of static equipment's
• Inspection for the hydro test by providing necessary blinds and venting arrangements
• Inspection for civil grouting activities, inspection for insulation check the heat flow through Insulation layers in steady state
• Saudi Aramco

• Company Overview: Mumbai, India
• Monitoring and administering the QA/QC Plan or Programme and ensuring incorporated materials on construction projects are in compliance with the plans and specifications
• Assuring that the work is performed as required by the contract and meets or exceeds the required qualities
• Assuring the acceptable quality of materials, processes, and workmanship in the project work
• Assisting Quality Assurance and Quality Control Engineer such as steel reinforcement checking same as in construction drawing
• Issue materials receiving report for the delivered materials
• Waterproofing checking underground level and in wet areas in the building
• Following up the concreting works in a presence of the Engineer or Consultant, slump test and Cubes preparation for the compressive test
• Finishing work checking in a presence of the Engineer or Consultant, block, plaster, painting, tiling, kitchen cabinets, wardrobes, ceiling and light fittings
• Maintain standards of safety and comply with Company’s Health, Safety
• Mumbai, India