Muhammad Khan Qazi Hassanullah

• Exercised leadership capabilities by successfully motivating and inspiring others.
• Ran errands and provided general office support in a professional environment.
• Demonstrated a high level of initiative and creativity while tackling difficult tasks.
• Learned and adapted quickly to new technology and software applications.
• Cultivated interpersonal skills by building positive relationships with others.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Proven ability to develop and implement creative solutions to complex problems.

§ Supervise group of QC-inspectors / engineers to ensure quality plan are implemented, documents and records maintained for quality internal audits.

§ To ensure that all inspection is executed efficiently and expeditiously in order to comply with engineering standards and master construction schedule.

§ Crosscheck the documents of QC - engineers / inspector (RFI attachments etc.) prior to submit.

§ Assist site Engineers / inspectors whenever possible.

§ Responsible for monitoring the site installation and testing as per as per approved inspection & test plan (ITP).

§ Review the method statement for all the particular activities prior to submitted client for their approval to start any activities.

§ Co-ordinate with engineering team for raising of TQ if any conflict/deviation found in project specifications / IFC.

§ To make sure that all material & equipment’s received on site fulfilling the project specification requirements and applicable standards with complete documents like MTA, PO, DN, COC, MTC.

§ To ensure that modifications in drawings are recorded accordance to the site and endorsed by client representative.

§ Co-ordinate with the field-engineering group, client as well as the third-party inspection team for inspection of the works carried-out as per the approved test plan & procedures.

§ Preparation of weekly reports for project deliverables as per schedule-Q requirements.

§ Prepare and submit two-week-look-ahead (TWLA) schedule based on project construction activities.

§ Attend QA/QC weekly meeting with contractor and client management team to resolve the issues/concerns related with quality.

§ Initiating internal LBE/NCR to construction for effective implementation of project quality plan, ITP’s, written procedures, project specifications, IFC drawings etc.

§ NCR shall be closed on agreed closing date with root cause analysis, corrective action, and preventive action.

§ To ensure that all site tests has been conducted prior the power energization of the project as per approved test plan.

§ Review QC dossier at the time of project completion prior to submit the client.

Responsible for providing technical leadership in technical solution / installation / design.

• Strengthened communication skills through regular interactions with others.
• Proven ability to learn quickly and adapt to new situations.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Developed and maintained courteous and effective working relationships.

§ Responsible to follow up with plant inspection activities, plans and conduct external and internal inspection to assess the physical situation of the plant equipment’s electrical and instruments and recommend the corrective measures as per Saudi Aramco Engineering standards & national electrical codes.

§ Witness/Inspection for field maintenance /repair of MCC, Switchgears, power transformers, motors, dry type transformers for low voltage system & power distribution systems.

§ Witness/Inspection for field electrical and instrument’s testing, calibrations.

§ Responsible to review and update company procedures (Elect. Inst. & Cathodic protection), standards and specifications industry codes and relevant drawings of plant.

§ Responsible to carry out the Cathodic Protection monitoring survey for storage tanks and underground pipe lines. (Monitoring the rectifier transformer on monthly basis, checking the rectifier transformer physical condition, oil level, Voltage and current ratio etc.) and recommend corrective measures as per Saudi Aramco engineering standard SAES-X-600 & SAES-X-400.

§ Performed on-going project inspection, surveillance and monitoring witnessed for the-on going construction activities, and issued corrective actions (NCR) against construction group for further action whenever standard violation found throughout the duration of project.

§ Responsible for material receiving inspections (High, Medium & Low voltages equipment’s but not limited to e.g, Transformers, switchgears, M.C.C’S, AFD, Shutdown panels, Motors, Marshaling cabinets, DCS Consoles, Instrument transmitters), for running and expansion projects.

§ Follow up with plant maintenance unit to provide them with the weekly or monthly schedule to be able to mark the major repairs, activities (e.g. Substations, MCC’S, Switchgears, transformers, motors, and battery banks.

§ Responsible of excavation activities that will be carried out in the plant and ensure the required check sign the excavation permit before starting the excavations.

§ Review the design packages of all projects, plant modifications or expansion works for compliance with MSAER.

§ Perform the walk-through and punch-listing on the projects to ensure construction is as per approved drawings

§ Ensures proper maintenance of inspection reports and records. Maintains various records in the computerized systems, updating inspection test results and other data in specialized inspection software system

§ Attend daily morning meeting.

· Review the scope of work, contract, technical requirements and specifications to perform the work incompliance to the specified requirements.

· Review company procedure, standards & specification industry codes and relevant drawings of Project implementation and before performing actual field inspections for work acceptance

· Assure that all electrical activities conforms to the International standards and client industry standards wherein taking considerations of the installations and guidelines of the international standards.

· Prepare and submit correspondence, transmittal, technical report, and work completion report, Methods statement, shop and as-built drawings.

· Identify and maintain the calibration of instruments and third party inspection activities.

· Conduct inspection with the client as pre-approved ITP. Method of statement in accomplished with project specification.

· Conduct inspection of materials & equipment when requested by material controller.

· Does regular inspection of the project and recommend corrective measures on defective methodologies.

· Performed project inspection, surveillance and monitoring witnessed for the-on going construction activity, and issued corrective actions (NCR) against construction group for further action whenever standard violation found throughout the duration of project.

· Witnessed/inspection for field installation of substations, MCC, Switchgears, transformers, motors, Bus ties, Duct Test, Bolt Torqueing Test, Dry type transformers for Low Voltage System & Power Distribution system.

· Inspection of Cable tray ladder type (M.V, L.V Cables) Fire protection and alarm system.

· Inspection for Lighting System Installation and Illumination Testing.

· Inspection of Plant Grounding System Installation and Grounding Resistance Testing.

· Inspection of cathodic protection system installation and testing for vent pipe and firefighting equipment.

· Inspection for plant lightning protection system installation and testing.

· Witnessed / Inspection & Testing for the Electrical materials, meggering & hi-potential test for MV & LV cables insulation resistance testing for low voltage cables and control cables, cables, cable gland installation, & terminations.

· Monitoring and surveying all electrical and instrumentations works and activities at the site and making sure that all are in proper procedure and conforms to the standards.

· Monitoring vendor’s material take off list as per engineering standards.

· Apply international standards and incorporate with the project standards to have a better resolution and output of task.

· Prepare all necessary documents needed prior to inspection such as RFI and Quality records.

· Participation of pre-inspection meetings with client for formulating the ways of inspection.

· Inspection of new material as per procurement order (P.O.) and reviewing of mill test certificate (MTC) and related procurement documents for traceability and conformance.

· Supervising and monitoring the QA/QC activities in different inspection stages.

· Verification of final visual and dimensional appearance of final product prior to offer client inspection.

· Preparation of final dossier (manufacturing record book) at the end of projects.

• Monitored installation of materials and equipment for compliance with drawings and specifications.
• Determined and scheduled priorities as required to progress engineering work.
• Identified technical risks within managed projects.
• Delivered regular compliance reports to drive process improvement and corrective measures.

· Review the scope of work, contract, technical requirements and specifications to perform the work incompliance to the specified requirements

· Prepare and review engineering plans, designs and circuit diagrams for projects.

· Write reports detailing current systems and changes to each site.

· Manage/coordinate mechanical, civil and software engineers.

· Preparation of scope of work for equipment and packages for material requisitions.

· Prepare technical/ material requisition of packages, method statements for all system.

· Preparing of As-built as per the modifications done at site.

· Supervising Electrical works for wiring as per the IFC’s for fire alarm, HVAC, Lighting networks. Close liaison with subcontractors & other construction disciplines, reporting to Electrical manager & Project manager.

· Execution of all Electrical works according to client codes and standards, procedure & requirements.

· Preparation of material handling, storage & preservation procedure according to codes and standard requirements.

· Preparation and review Electrical datasheets for equipment’s and package specifications.

· Perform visual inspection and dimensional checks on all electrical & Instrumentations related works such as cable trays installations cable pulling, wiring, conduit, junction box installations local control board panels and equipment installation.

· Conducting weekly progress meeting with all related sections for any interface.

• Read and interpreted blueprints, technical drawings, schematics, and computer-generated reports.
• Conducted research to test and analyze feasibility, design, operation and performance of equipment, components, and systems.
• Resolved architecture, design or verification problems by applying sound ASIC engineering practices.
• Developed work plans for various personnel roles based on strengths and talents.

· Look after for the Smooth Operation of 15 MW / 11KV Coal / Gas fired Thermal Power

Plant, 15 MVA submerged arc furnace producing in Ferro Alloys.

· 5 MVA submerged arc Furnace on 5 MW / 11 KW K.E.S.E Supply producing Calcium Carbide / Ferro Alloy

·

Maintains the System Voltage & Frequency at prescribed levels all the time.

· Responsible to conduct all the engineering surveys (Fires, marine & property damage)

Risk analyzing, loss adjusting of property damage on the behalf of insurance companies.