Noor Aslam
QC Piping inspector
Jubail,KSA
Summary
Professional with deep expertise in piping quality control and inspection, focusing on ASME standards and various NDT methods including RT, UT, PT, and MT. Experienced in HVAC design engineering, excelling in heat load calculations, duct sizing, and equipment selection per ASHRAE standards. Proficient in computer-aided design software such as SolidWorks, Ansys, Creo, and COMSOL, ensuring accurate project execution. Proven track record in site coordination and client communication, maintaining compliance with project specifications through thorough inspection documentation.
Overview
6
6
years of professional experience
1
1
Certification
Work history
QC Piping Inspector
Al HUSSAM Contracting Company
Najran
07.2024 - 09.2025
- Conducted detailed inspection of incoming piping materials, flanges, valves, and fittings by verifying Mill Test Certificates (MTCs), heat numbers, and grades in compliance with ASME B36.10 and ASME B36.19.
- Monitored installation activities for compliance with project specifications and issued Internal Non-Conformance Reports (INCR) in case of deviations.
- Investigated and resolved client NCRs by implementing corrective actions and identifying root causes.
- Inspected pipe fit-ups for alignment, root gap, and bevel preparation as per Welding Procedure Specifications (WPS) and ASME Section IX.
- Witnessed and documented visual welding inspections, ensuring traceability by recording welder IDs and weld joint numbers on isometric drawings.
- Applied ASME B31.3 throughout fabrication and inspection stages, verifying wall thickness, material compatibility, and hydrostatic test requirements.
- Verified selection and installation of flanges (Weld Neck, Slip-On, Blind) using ASME B16.5, and checked gasket compatibility as per ASME B16.20.
- Coordinated Non-Destructive Testing (NDT) activities (RT, UT, PT, MT), reviewed test reports and radiographs, and ensured compliance with ASME Section V and API 1104.
- Performed pre-test line checks using piping isometrics and ensured flange bolt tightening, valve orientation, and gasket placement before hydro/pneumatic testing.
- Reviewed and validated hydrotest packages, including P&ID markups, material traceability, weld logs, and valve/flange checklists, ensuring punch items were cleared.
- Supervised hydrostatic testing by confirming correct pressure calculations (1.5× design pressure), gauge calibrations, and safety measures per ASME B31.3.
- Reviewed and approved Inspection & Test Plans (ITPs), Method Statements, and Material Submittals as per client/project requirements.
- Raised Work Inspection Requests (WIRs) and submitted key QC documents such as Fit-Up Reports, NDT Clearances, and Test Packs for approval.
- Maintained complete QA/QC documentation, including weld logs, material traceability records, and final handover dossiers (as-built packages).
- Collaborated with construction, QA, and safety teams during internal audits, client walkthroughs, and toolbox talks to ensure full compliance with codes and project standards.
QC Piping Inspector
Al HUSSAM Contracting Company
Najran
07.2024 - 09.2025
- Conducted detailed inspection of incoming piping materials, flanges, valves, and fittings by verifying Mill Test Certificates (MTCs), heat numbers, and grades in compliance with ASME B36.10 and ASME B36.19.
- Monitored installation activities for compliance with project specifications and issued Internal Non-Conformance Reports (INCR) in case of deviations.
- Investigated and resolved client NCRs by implementing corrective actions and identifying root causes.
- Inspected pipe fit-ups for alignment, root gap, and bevel preparation as per Welding Procedure Specifications (WPS) and ASME Section IX.
- Witnessed and documented visual welding inspections, ensuring traceability by recording welder IDs and weld joint numbers on isometric drawings.
- Applied ASME B31.3 throughout fabrication and inspection stages, verifying wall thickness, material compatibility, and hydrostatic test requirements.
- Verified selection and installation of flanges (Weld Neck, Slip-On, Blind) using ASME B16.5, and checked gasket compatibility as per ASME B16.20.
- Coordinated Non-Destructive Testing (NDT) activities (RT, UT, PT, MT), reviewed test reports and radiographs, and ensured compliance with ASME Section V and API 1104.
- Performed pre-test line checks using piping isometrics and ensured flange bolt tightening, valve orientation, and gasket placement before hydro/pneumatic testing.
- Reviewed and validated hydrotest packages, including P&ID markups, material traceability, weld logs, and valve/flange checklists, ensuring punch items were cleared.
- Supervised hydrostatic testing by confirming correct pressure calculations (1.5× design pressure), gauge calibrations, and safety measures per ASME B31.3.
- Reviewed and approved Inspection & Test Plans (ITPs), Method Statements, and Material Submittals as per client/project requirements.
- Raised Work Inspection Requests (WIRs) and submitted key QC documents such as Fit-Up Reports, NDT Clearances, and Test Packs for approval.
- Maintained complete QA/QC documentation, including weld logs, material traceability records, and final handover dossiers (as-built packages).
- Collaborated with construction, QA, and safety teams during internal audits, client walkthroughs, and toolbox talks to ensure full compliance with codes and project standards.
QC Piping Inspector
SAPAC
Jizan
07.2023 - 05.2024
QC Piping Inspector
SAPAC
Jizan
07.2023 - 05.2024
QC Piping Inspector
Contracting and Construction Enterprises (CCE)
Tabuk
07.2022 - 05.2023
QC Piping Inspector
Contracting and Construction Enterprises (CCE)
Tabuk
07.2022 - 05.2023
QC Piping Inspector
Asiad Int.Co.Ltd.
Ras Tanura
01.2021 - 06.2022
QC Piping Inspector
Asiad Int.Co.Ltd.
Ras Tanura
01.2021 - 06.2022
Mechanical Pipeline Internee
Sui Northern Gas and Pipelines Limited
Karak
01.2020 - 11.2020
Mechanical Pipeline Internee
Sui Northern Gas and Pipelines Limited
Karak
01.2020 - 11.2020
Education
Bachelor of Science - Mechanical Engineering
UET LAHORE
Lahore, PakistanSkills
- Piping Quality Control & Inspection
- ASME
- Section V
- Fit-up inspection
- Welding inspection
- Flange alignment
- Final line checks
- Material traceability
- Verifying heat numbers
- MTCs
- Correct material installation
- Hydrostatic test packages
- Pneumatic test packages
- Witnessing tests
- NDT activities
- RT
- UT
- PT
- MT
- Interpretation of NDT reports
- Inspection Test Plans (ITPs)
- RFIs
- NCRs
- Punch lists
- Final QC dossiers
- HVAC Design Engineering
- HVAC system design
- Layout
- Heat load calculations
- Duct sizing
- Chilled water piping
- Ventilation
- Equipment selection
- ASHRAE standards
- Computer aided software
- SolidWorks
- Ansys
- Creo
- COMSOL
- Carrier E20-II
- MS Office Suite
- Adobe Acrobat Pro
- Interpretation of P&IDs
- Isometric drawings
- GA drawings
- Project specifications
- Welding consumables
- Preheating
- PWHT
- Welder qualification records
- Site coordination
- Client/consultant communication
- Quality audits
- As-built drawings
- Progress tracking
- Inspection documentation
Certification
- Specialization of Project Management
- MEP Designing Certification
- DAE Mechanical Engineering
- HSE Engineering
Languages
English
Urdu/Hindi
Arabic
Personal Information
- Passport Number: BS1831911
- Title: QC Piping Inspector
- Nationality: Pakistan
- Work Permit: Transferable Iqama
- Visa status: Transferable Iqama
- ID Type: Passport
- ID Number: BS1831911
Custom Section
QC Piping Inspector
Timeline
QC Piping Inspector
Al HUSSAM Contracting Company
07.2024 - 09.2025
QC Piping Inspector
Al HUSSAM Contracting Company
07.2024 - 09.2025
QC Piping Inspector
SAPAC
07.2023 - 05.2024
QC Piping Inspector
SAPAC
07.2023 - 05.2024
QC Piping Inspector
Contracting and Construction Enterprises (CCE)
07.2022 - 05.2023
QC Piping Inspector
Contracting and Construction Enterprises (CCE)
07.2022 - 05.2023
QC Piping Inspector
Asiad Int.Co.Ltd.
01.2021 - 06.2022
QC Piping Inspector
Asiad Int.Co.Ltd.
01.2021 - 06.2022
Mechanical Pipeline Internee
Sui Northern Gas and Pipelines Limited
01.2020 - 11.2020
Mechanical Pipeline Internee
Sui Northern Gas and Pipelines Limited
01.2020 - 11.2020
Bachelor of Science - Mechanical Engineering
UET LAHORE