Ram PUJAN YADAV

SACS System- VASS System- SACS Rack- Fiber Optic Cable(FOC) System-

• Planning ,Coordination, Implementation and execution of Installation, Commissioning & AT Plan of Siemens CCTV IP based Fixed Camera and PTZ Camera(SIQURA), CAT 6/6A cable(Systimax and CommScope),Turnstiles(DormaKaba), Drop Gates(DormaKaba).
• Nedap Door Controller (AP7803) and Door Interface (AP7003) Installation and IP Assigned to the controller and testing with Devices.
• Installation ,megger and continuity testing of 2 pair,4 pair and 8 control cables as per approved cable schedule.
• Planning ,Coordination,Implementation and execution of Installation, Commissioning & AT Plan of Dell EMC Server, LAN Dongle, Juniper Switch, Network Video Recorder & RJ45 Patch Panel.
• Internal Pre QC Plan and execution with QC Inspector.
• QC plan and audit with Aramco PID,QC Inspector with subsequent RFI closure .
• Red Line drawings as per physical installation and subsequent changes as "Red Line Drawings".
• Assembly of Field Equipment Cabinet(FEC) for VASS System with MOXA Industrial Switch, MOXA Power Supply Unit,ADAM‑6066,MCB Breakers, P/W Outlet and Fiber Optic Enclosure.
• Installation and Azimuth set of Fence Fixed cameras.
• Commissioning & Orientation setting of all fence cameras.
• Conducting Fluke Test of all UTP & subsequent report preparation and submission to QC/PID.
• Redline Drawing Preparation in accordance with changes in IFC drawings.
• Installation SACS Cabinet with 24 Port UTP Patch Panel, Fiber Optic Patch Panel, Controller(K32EX),Network Video Recorder(Dell EMC),KVM Switch(Dell),LED Console(Dell) and LAN Dongle.
• Installation of Work station ,KVM extender and RS‑485 @ Gate House. Termination of Controllers at device and terminal blocks(TB).
• Termination of all SACS camera with existing ARAMCO Switch.
• Supervised site work to verify quality and safety standards ahead of sign off.
• Project management, co‑ordination & supervision of project work for timely and quality execution.
• Supervision of quality installation of 6/12 core fibre optic cable/enclosures as per cable layout schedule.
• Supervision of splicing of foc ensuring losses@ respective enclosures/FEC cabinets.
• HCIS Package Execution( RFI, QC & FAT & SAT)) Activities.
• Execution of Stage 1,2,3 Approval with SEC Consultant.
• Execution of Site Survey along with safety officer ensuring evaluation of facility classification with risk analysis, environmental conditions & adequate security measures as per HCIS Directive.
• Supporting for preliminary & Detail design package preparation for HCIS submission.
• Ensuring Installation with Optimal Performance validation fallowed by FAT, Pre‑SAT & SAT.
• Preparation of Maintenance & Support Manuals.
• Preparation of Compliance & Non‑Compliance report with justification & reason for HCIS review & approval.
• Conducting Fluke Test of all UTP & subsequent report preparation and submission to QC consultant.
• Study of Red Line drawings as per physical installation and subsequent changes as "Red Line Drawings.
• Internal Pre QC Plan and execution with QC Inspector for WITNESS points in close coordination with Sub‑contractor.
• Network Testing and test report preparation of CAT6 with Fluke DSX 5000 model.

Perimeter Intrusion Detection Alarm System(PIDAS)-

• 📷 Supervision of Installation of Micro‑Point PoE 334and 390 System(Southwest Microwave) & Intrepid Micropoint II.

• Dahua (ITC952) Camera and IR (Infra-Red) Installation
• Hikvision camera and IR installation and configuration
• Coordinate With Customer and Complete the Task as given timeline Handover site as per customer Requirement
• Installation of IP CCTVs Bullet Camera, Dome Camera & IR camera (Dahua, Hikvision)
• Installation, Commissioning & Configuration of CCTV (Dahua, Hikvision) Installation, Commissioning & Configuration of NVR (Hikvision)
• Configuration of Red Light & Fex Speed Radar with IR Camera
• Acceptance Plan (AT) execution with customer representative as per requirement
• Installation of UTP cable (CAT6/6A) (Commscope)
• Fluke testing of all UTP Cables and report preparation
• Inspection of Civil Work Hand Hole and main Base Foundation Trenching soilexcavation execute the site as per Design
• Site Update on Eagte App System installation, Civil Implementation, system configuration QC Plan execution with customer engineer for all Devices
• Troubleshooting of all types of cameras before Pre Acceptance Plan
• Red Line Drawing Updating as per customer requirement
• Preparation of daily report & weekly report to higher management.

• Samsung ENB maintenance, extension of bands 1800 & 850 in Existing E-Node B sites with solpar teams Observing alarms with NOC to maintain the grade of service and proper escalation to concern team for modification
• Trouble shooting during Integration activity of NW( E-Node B, LSMR, MW & Cisco) Giving technical support to engineers for any problem related with network, especially for E-Node B, LSMR Issues
• Preparation Operation Deputy Data for Grow, Commissioning, Integration of eNodeB
• Grow & De-grow Samsung eNodeB in OSS
• Upgrading the Samsung eNodeB Software & Firmware
• RJIO IBS Site Installation & Integration.

• Monitoring & maintenance of BTS, WBTS, BSC & transmission Equipment
• Knowledge of NSN 2G flexi, NSN multi radio BTS, Airscale BTS
• Installation & commissioning of 2G Flexi & ultra BTS, NSN multi radio BTS, single ran BTS
• Installation & commissioning of SDH microwave links (FIU, flexi hybrid,ceragon)
• Carrying out Survey & Optimization activity with RF team to improve KPI
• Knowledge of link budget preparations & network planning
• Conducting AT with Project Personnel for Infra, IBS, BTS & MW
• Provisioning of ET & E1 for new sites monthly rollout up to far end.

• Installation, commissioning & configuration of Microwave Antenna with specified degree & polarizations
• Quality testing and acceptance (AT) analysis of new sites and taking corrective actions through vendors
• Putting license key and software up gradation in R2 IDUs
• Involved in sites RF audits and antenna system audits
• Responsible for Acceptance test of microwave links.

• Good working knowledge on RFE1 Site survey, installation, integration, commissioning (4G RJIL)
• Good working knowledge of Samsung ENB equipment elements
• Replacement of faulty modules of 4G Samsung equipment
• Co-ordinate with LSMR team during 4G site integration
• Monitored, configured & troubleshot Network elements of RJIL& Samsung.