Samuel Tadifa, Jr.

Project: Contruction of Rafha 380/132 kV BSP_Saudi Electricity Company

• Participated in the installation of direct buried/concrete-encased PVC conduit for power, control, and communication lines.
• Involved in the installation of cable raceway such as cable tray/trunking and rigid conduit installation.
• Involved in the laying of grounding grid cables (below and above ground), and made connections using exothermic welding or crimped terminal lugs on equipment.
• Installed 380kV GIS earthing system outdoor
• Installation of lighting fixtures and power receptacles in indoor and outdoor areas of substation buildings.
• Involved in power cable termination in power panels, power transformers MV side, and auxiliary transformers.
• Installation of lighting poles and lightning mast

Project: SEED Project of HDEC (Aramco-Uthmaniyah Gas Plant)

• Served as an internal permit receiver, focusing on electrical works in several substations, such as the installation of various electrical panels, a rigid steel conduit system, a cable tray system, and cable pulling and termination of LV power and control cables.
• Involved in the installation of various power and control panels.
• Participated in the cadwelding, grounding of plant, and substation grid cables.
• Involved in the cable pulling of 230 kV HV cable from the GIS building to the Gantry area, replacing the old AIS system.

Project: Jubail New Residential 380/230/115 kV BSP_Saudi Electricity Company

• Involved in the installation of PVC conduits below ground (DB and concrete-encased) and above ground for power, control, and telecommunication lines.
• Involved in the fabrication and installation of rigid steel conduits.
• Involved in the installation of Unistrut cable supports and cable tray systems in 380/115 kV cable tunnels.
• Involved in the cable pulling of LV, MV, and HV power cables.
• Involved in the termination of LV and MV power cables in various power panels.
• Involved in the installation of lighting fixtures and power receptacles in the 380 kV GIS building and tunnels.
• Involved in the application of firestop materials in PVC sleeves, openings, and HV cable painted.
• Also worked in the several remote ends of Jubail's new residential 380/230/115 kV BSP. which involved control/power panel installation, cable pulling, and termination.

Project: Construction of Shedgum 380/115 kV BSP_Saudi Electricity Company

• Involved in the termination of LV and control cables in LCC panels and devices of 380 kV GIS equipment.
• Involved in the termination of grounding grid cables using exothermic welding (below ground) and crimped-type termination (above ground) on various electrical equipment.
• Application of approved firestop materials (Hilti) in building wall openings and HV power cables by painting,

• Performed preventative maintenance on the electrical and electronic equipment of the resort.
• Inspected, tested, and maintained industrial control systems of chillers, building air conditioning systems, and lighting systems.
• Performed a routine inspection on existing pumping equipment to ensure reliability and performance, and prepared and submitted the completed maintenance reports required.