SYED ANAS QUADRI

Project: Expansion of Rabigh-2 Powerplant 380KV BSP Substation
Client: NEOM / SAUDI ELECTRICITY COMPANY

• Assure the Quality Standards as per project Specifications.
• Preparation and submittal of RFI.
• Review and Inspection of all Electrical Material (MIR's) prior to installations.
• Daily monitoring the Construction Activities and Raise Surveillance (or) Non-Conformance Report.
• Responsible for Overall implementation of Quality Control related electrical works accordance with project specifications and Engineering Standards.
• Verify the equipment and devices used in project meets the required specifications as per project requirements, standards and tested in accordance with the procedures.
• Monitor the Underground installations; check the required burial depth and spacing requirements to adjacent installations, prior to back filling.
• Inspection of Electrical Installation Panels monitoring control panel wiring, termination, cable routing and cable tray installation.
• Verify all required Inspection Report and test records are systematically generated and compiled according to the QC procedures.
• Coordinate with client representatives regarding the implementation and quality of works.
• Inspection of Switchgear Panel Installation, Cable termination and Bus Bar torque.
• Installation of Control Panel marshaling panels and termination continuity and Megger test.
• Inspection of Ground Rod and Grounding Cable, as per Engineering specification.
• Preparation of Electrical Inspection Reports.
• Inspection of Heat Tracing Panel Installation, PT, RTD junction box installation and heat tracing cable laying and Meggering.
• Provide sufficient feedback to QA/QC manager on the day to day quality issues.
• To supervise and carry out effective implementation of work schedule to clear punch list.

Project: Construction of UML-JOUD GIS Substation BSP 380KV/110KV
Client: SAUDI ELECTRICITY COMPANY

• Assure the Quality Standards as per project Specifications.
• Prepared, documented and executed detailed test plans, test cases and defect reports.

• Preparation of Inspection and test plan, construction quality procedure and method of statement.
• Preparation and submittal of RFI.
• Review and Inspection of all Electrical Material (MIR's) prior to installations.
• Daily monitoring the Construction Activities and Raise Surveillance (or) Non-Conformance Report.
• Responsible for Overall implementation of Quality Control related electrical works accordance with project specifications and Engineering Standards.
• Verify the equipment and devices used in project meets the required specifications as per project requirements, standards and tested in accordance with the procedures.
• Monitor the Underground installations; check the required burial depth and spacing requirements to adjacent installations, prior to back filling.
• Inspection of Electrical Installation Panels monitoring control panel wiring, termination, cable routing and cable tray installation.
• Verify all required Inspection Report and test records are systematically generated and compiled according to the QC procedures.

• Coordinate with client representatives regarding the implementation and quality of works.

• Inspection of Switchgear Panel Installation, Cable termination and Bus Bar torque.

• Installation of Control Panel marshaling panels and termination continuity and Megger test.

• Inspection of Ground Rod and Grounding Cable, as per Engineering specification.
• Preparation of Electrical Inspection Reports.

• Inspection of Heat Tracing Panel Installation, PT, RTD junction box installation and heat tracing cable laying and Meggering.
• Provide sufficient feedback to QA/QC manager on the day to day quality issues.
• To supervise and carry out effective implementation of work schedule to clear punch list.

Project: SMART FIELD MV EQUIPMENT REPLACEMENT-(SRMU)

Client: SAUDI ELECTRICITY COMPANY

• Assure the Quality Standards as per project Specifications.

• To Prepare Construction Quality Procedure and Method of Statements.

• Inspecting & supervising the smart RMU & installation work as per define method of statement as per compliance of Saudi Electric Company’s technical specification and standards.

• To understand the specifications and Engineering Reference Documents (ERD’s) and to Implement at the work site for achieving a Good Quality Work.

• Verify all the Checklists Before and After construction works.

• Preparation and Submittal for RMI and RFI.

• Review and Inspection of all Electrical Material, prior to construction works.

• Daily monitoring the Construction Activities.

• Responsible for the over-all implementation of Quality Control related electrical works in accordance with project specifications and Engineering Standards.

• Reporting weekly Progress report to QA/QC Manager.

• Issue NCR for any type of NON- CONFIRMITIES Observed.

• Attending monthly meetings with Project Team and improve all Quality Standards.

• Verify all required inspection report and test records are systematically generated and compiled according to the approved QC Procedures.

• Provide sufficient feedback to QA/QC Manager on the day to day quality issues.

• Monitoring the quality with Al Gihaz internal “Quality Management tracking system” and preparing weekly QMTS reports.

• Supervised Electrical Smart RMU installation work & tests and submitted reports to Saudi Electric Company for approval.

• Supervising RMU installation & T&C for compliance of Saudi Electric Company’s technical comments.

Project: Installation & Maintenance of Fire Alarm System in Al-Adl BSP Substation 380KV, Service building.

Client: SAUDI ELECTRICITY COMPANY

• Evaluated electrical installations and systems to isolate faults and implement corrective actions.
• Inspected completed installations to observe operations and verify conformance to design and equipment specifications.
• Reduced electrical construction hazards with upgraded safety policies and stringent enforcement.
• Identified specific cables, fuses and circuit breakers required for assigned installations.
• Completed projects within deadlines and budgets by efficiently managing resources, schedules, and subcontractors.
• Increased safety standards by conducting thorough risk assessments and implementing preventive measures for electrical installations.
• Maintained accurate documentation throughout project lifecycle, including drawings, calculations, specifications, approvals, and inspection records ensuring easy access during audits or future reference requirements.
• Checked work quality and compliance with design specifications.
• Evaluated existing fire alarm and suppression systems, recommending upgrades and improvements for optimal performance.

• Increased cost-efficiency by identifying opportunities for process improvement within the realm of electrical system management.
• Improved equipment reliability by conducting regular preventive maintenance and repairs on electrical systems.
• Developed and implemented effective maintenance schedules for electrical systems, ensuring optimal performance at all times.
• Maintained strong vendor relationships to ensure timely delivery of replacement parts and support services when needed.
• Scheduled and undertook periodic maintenance on all electrical installations, components and equipment.
• Maintained and fixed lighting and fixtures.
• Documented maintenance activities and confirmed compliance with relevant regulations.

• Provided on-site engineering and technical services during installation and fielding processes.
• Assisted with Engineering calculations, design drawings, preliminary cost estimates and field visits to observe construction progress.
• Completed functional analysis and root cause test.
• Worked closely with Engineers and assisted with testing of products.
• Established construction, manufacturing and installation requirements.
• Designed, implemented and maintained electrical products and systems.
• Lighting calculations for number of fixtures.
• Lighting and power circuits as per standards.
• Calculating the load of different types of equipments as per standard specifications.
• Calculating LUX level for different types of lamps like GLS, FTL, CFL, LED etc.
• Load scheduling (single house, apartments, high rise buildings etc.) common area, open area and load calculations.
• Calculations of cable sizes as per standards.
• Voltage drop and short circuit calculations.
• Selection of switchgears and panel boards (MDB, SMDB, SDB etc.) and transformers.
• Selection of capacitor banks (power factor improvement).
• Selection of emergency lighting system: backup power from solar panel, UPS, diesel generator.
• Preparation of Single Line Diagram.
• Types of Earthing according to requirements.
• Preparation of maintenance task list for transformer, generators and there auxiliaries, low voltage.