Mohamed Elsayed Saber

• Red sea -AMAALA VBH project - MEP Works

HVAC and Ammonia refrigeration plants

• Close monitoring of the financial status of the project.
• Managing the drawing, planning, and material submittal and procurement processes.
• Dealing with material suppliers and confirming a delivery date
• Developing operations process to streamline the business and increase profits.
• Supporting Supply chain team in shipping and logistics process.
• Developing standard contracting template to be used for installation works.
• Facilitate the definition of project scope, goals, and deliverables.
• Maintains projects schedule by monitoring project progress; coordinating activities; resolving problems.
• Ensure that the subcontractors are working as per the project specifications and standard requirements.
• Ensure that all incoming materials meet the standards as well as the project specifications.
• Issue '' NCR '' and follow up on the corrective and preventive actions with subcontractors.
• Before commencing the work, ensure that the construction drawings, MOS, quality, and HSE plans have been approved by the client.
• Provide a technical solution to construction issues.
• Ensure that the construction activities meet the requirements of the standard and project specifications.
• Review all the drawing and work closely with the design engineer before submitting to the client.
• Attend the technical meeting and discuss the drawing issues with the client till approval.
• Perform audit with subcontractors to ensure compliance.
• Follow up on the commissioning and start-up activities with all concerned parties until handover.
• Follow up on the ammonia pressure vessels during the construction phase, such as fabrication, welding, and pressure testing.
• Follow up on the execution of the mechanical and electrical activities for HVAC and ammonia refrigeration plants.
• Use AutoCAD to update any changes made to the drawings.
• Provide the utmost support to subcontractors in learning how to read the P&ID and isometric drawings.
• Prepare and develop all inspection forms and ensure they are implemented by all subcontractors.
• Prepare daily, weekly, and monthly reports.
• preparing the final handover documents and forms.
• Reviewing the project's WPS documents and witnessing PQR
• supervise the hydrostatic and pneumatic testing.
• Prepare and review the pressure test package documents.
• Follow up and inspect the cable tray installation before commencing cable pulling
• Make sure the power and control cables diameter as per approved drawing and SLD
• Follow up and inspect the cable pulling, and make sure the designed cable tray empty distance is implemented.
• Carry out the inspection of all electrical panels as well as cable termination.

Fabrication and installation of O&G piping network and HVAC system

• Ensure that the subcontractors are working as per the project specifications and standard requirements.
• Ensure that all incoming materials meet the standards as well as the project specifications.
• Issue '' NCR '' and follow up on the corrective and preventive actions with subcontractors.
• Prepare and review all required quality documents, such as the quality plan, NDE procedures, WPS, ITP, and installation MOS.
• Collaborate with the project manager and other stakeholders to integrate quality requirements into project
  objectives.
• Ensure that documentation is organized and readily accessible for audit and review.
• Collaborate with HSE team and ensure that QA/QC process align with safety and environmental standards.
• Check that the construction drawing matches the site condition and create an as-built drawing in
  collaboration with the design engineer.
• Before commencing the work, ensure that the construction drawings, MOS, quality, and HSE plans have
  been approved by the client.
• Provide a technical solution to construction issues.
• Ensure that the construction activities meet the requirements of the standard and project specifications.
• Prepare the snag list and follow up with all subcontractors and construction engineers before commissioning and start-up activities.
• following up on the pre-commissioning activities such as flushing and air blowing.
• Perform audit with subcontractors to ensure compliance.
• Follow up on the commissioning and start-up activities with all concerned parties until handover.
• Follow up on the ammonia pressure vessels during the construction phase, such as fabrication, welding, and
  pressure testing.
• Follow up on the execution of the mechanical and electrical activities for HVAC systems.
• Use AutoCAD to update any changes made to the drawings.
• Provide the utmost support to subcontractors in learning how to read the P&ID and isometric drawings.
• Follow up and inspect the painting system with all subcontractors.
• Prepare and develop all inspection forms and ensure they are implemented by all subcontractors.
• Witnessing and evaluating NDT techniques such as RT, MT, VT, UT, and PT.
• Supervise the welder qualification testing.
• Witness the vacuum box, hardness, and pressure testing.
• supervise the hydrostatic and pneumatic testing.
• Prepare and review the pressure test package documents.
• Follow up and inspect the cable tray installation before commencing cable pulling
• Make sure the power and control cables diameter as per approved drawing and SLD
• Follow up and inspect the cable pulling, and make sure the designed cable tray empty distance is implemented.
• Apply the cable maggering test and maintain the report.
• Carry out the inspection of all electrical panels as well as cable termination.

Fabrication and installation of the piping network, tanks and equipment.

• Check the dimension accuracy and make sure it matches the approved drawing.
• preparing the final handover documents and forms.
• Reviewing the project's WPS documents and witnessing PQR
• Carrying out the welding inspection before, during, and after welding.
• supervise the hydrostatic and pneumatic testing.
• Prepare and review the pressure test package documents
• Ensure that documentation is organized and readily accessible for audit and review.
• Collaborate with HSE team and ensure that QA/QC process align with safety and environmental standards.
• Check that the construction drawing matches the site condition and create an as-built drawing in collaboration with the design engineer.
• Provide a technical solution to construction issues
• Prepare the snag list and follow up with all subcontractors and construction engineers before commissioning and start-up activities.
• following up on the pre-commissioning activities such as flushing and air blowing.
• Use AutoCAD to update any changes made to the drawings.
• Witnessing and evaluating NDT techniques such as RT, MT, VT, UT, and PT.
• Supervise the welder qualification testing.
• Check the fit-up and dimensional accuracy of the piping before welding.
• Follow up on all construction activities at the site.
• Witness the vacuum box, hardness, and pressure testing.
• Monitoring and following the welding sequence according to the fabrication sequence to control any expected distortion during tank fabrication.
• Prepare daily, weekly, and monthly reports.
• Ensure that the pre-heat and post-weld heat treatment activities are performed correctly, review the charts, and make the necessary reports.

Fabrication and installation of the piping network, tanks and equipment

• Collaborate with the project manager and other stakeholders to integrate quality requirements into project objectives.
• Ensure that documentation is organized and readily accessible for audit and review.
• Collaborate with HSE team and ensure that QA/QC process align with safety and environmental standards.
• Check that the construction drawing matches the site condition and create an as-built drawing in collaboration with the design engineer.
• Before commencing the work, ensure that the construction drawings, MOS, quality, and HSE plans have been approved by the client.
• Provide a technical solution to construction issues
• Prepare the snag list and follow up with all subcontractors and construction engineers before commissioning and start-up activities.
• following up on the pre-commissioning activities such as flushing and air blowing.
• Use AutoCAD to update any changes made to the drawings.
• Witnessing and evaluating NDT techniques such as RT, MT, VT, UT, and PT.
• Supervise the welder qualification testing.
• Check the fit-up and dimensional accuracy of the piping before welding.
• Follow up on all construction activities at the site.
• Follow up welding processes such as SAW, EGW, SMAW, GTAW, and FCAW.
• Witness the vacuum box, hardness, and pressure testing.
• Monitoring and following the welding sequence according to the fabrication sequence to control any expected distortion during tank fabrication.
• Prepare daily, weekly, and monthly reports.
• Ensure that the pre-heat and post-weld heat treatment activities are performed correctly, review the charts, and make the necessary reports.

Inspection and re-installation of the piping network and equipment's.

• Ensure that all incoming materials meet the standards as well as the project specifications.
• Prepare and review all required quality documents, such as the quality plan, NDE procedures, WPS, ITP, and installation MOS.
• Witnessing and evaluating NDT techniques such as RT, MT, VT, UT, and PT.
• Supervise the welder qualification testing.
• Check the fit-up and dimensional accuracy of the piping before welding.
• Follow up on all construction activities at the site.
• Prepare and review the pressure test package documents
• Collaborate with the project manager and other stakeholders to integrate quality requirements into project objectives.
• Follow up the installation, inspection process for all equipment's.
• Collaborated with engineering team to communicate and achieve quality standards and outputs.
• Check that the construction drawing matches the site condition and create an as-built drawing in collaboration with the design engineer.