SHAFEEQUE THODIKA

Projects:-

AMAAD Business Park Hospitality Project (May 2020 May-till date)

(Includes 4 star Multistory Hotel Building with infrastructure) Khobar, KSA

Owner: KFUPM

Ministry of housing Developmental Housing program Wave-3 Abha.

(Includes 500 Villas with One,Two, Three and Four Bedroom units).

South Dahran Home ownership Project (July 2017- Feb 2020)

(Includes 12 school buildings and One fire station building) Dammam, KSA

Owner: Saudi Aramco

Infrastructure

• Review shop drawings, vendor design packages for all mechanical underground utilities (storm and sanitary drainage, firefighting, LPG and Irrigation system) and other site related quality and health and safety documentation.
• Review of material technical submittal for underground pipes, fittings and valve for mechanical utilities.
• Review method of statement (MOS),
• Monitor all site related material quantity by providing asset monitoring log for delivered and undelivered materials and equipments
• Support the subcontractor in solving technical issues at site and assisting in documentation for raising technical queries when required.
• Giving suggestion to contractor /subcontractor in making quality documents in line with project specification/standard and procedures on how to maintain good records for drawing, submittal and other project records .
• Consistently coordinating with all other discipline (electrical, civil, surveyor and architectural) for all new structure (Lift stations, sump pits and manholes) works to coordinate mechanical pipe sleeve’s location and elevation for pipe penetration to avoid clashing with new and existing utilities.
• Initiating submission of pre-commissioning, testing and commissioning plan schedule and Method of statement for all external/underground utilities.
• Advice in the planning, co-ordination and supervision of technical aspects of construction projects.  Identify and solving technical issues, providing advice, management and preparing reports
• Monitor site activities to ensure that construction is progressing according to approved drawings, planned schedules and budgets.
• Attend coordination meetings with all discipline making sure utilities are to be laid without any clashing or interference.

Other responsiblities

• Leading engineers to make detail review of the IFC design documents and highlight the issues if any in the log or file.
• Leading engineers to make detail review of the Project specification documents and highlight the issues if any in the log or file.
• Reviewing the scope of work and the contract between the main contractor and the client.
• Reviewing the sub-contractors prequalification documents.
• Providing technical advice for coordination drawings preparation related services using BIM modeling.
• Reviewing the positive and negative variations as per the contract documents.
• Leading Engineers to review the shop drawings, redline drawings, tagging drawings, isometric drawings, as-built drawings, MTS/MR/MR-601/602/603 as per the schedule
• Coordinating with the vendors or manufacturers for the material technical submittal, if any issues.
• Organizing and attending meeting with the manufacturer’s, vendor, subcontractors, department engineers for solving the technical issues
• Attending project, site progress and any services related technical meetings as directed by the project manager.
• Providing advice to the Project Manager in regard to any services related variation costs that may be claimed by the Contractor during the course of the works.
• Set up meetings to resolve specific site problems as required to minimize program delays.
• Reviewing Contractor’s shop drawings against the design [tender] drawings for compliance with the design intent and return to Project Manager with appropriate comments / approval within the specified contractual period
• Where required preparing technical clarifications to the tendered design to suit specific on-site construction and co- ordination issues.
• Reviewing of design in accordance with local codes and international standards (i.e. NFPA)
• Review material submittals of pumps, valves, zone control valves, landing valves, pipes, fire hose cabinets, fire hydrants, fire extinguishers and sprinklers (upright, pendent, concealed, horizontal)
• Supervise contractors team performance, guide and report any problems to the site manager in order to take necessary action.
• Supporting the IFC designer for the designing of Mechanical Piping, HVAC, Fire Protection, Plumbing and DDC/BMS system with respect to IFB design documents
• Coordinating with the designer and client (SAPMT) for the designing of the systems.
• Raising the TQ to SAPMT for the deficiencies in the system with the alternative solutions with the applicable codes and standards
• Reviewing the calculations, IFC drawings, the sequence of operation, specifications, equipment schedules, etc… with respect to IFB design documents
• Reviewing the shop drawings, redline drawings, tagging drawings, isometric drawings and as-built drawings submitted by subcontractors.
• Coordinating with electrical department before the energization of the equipment’s.
• Reviewing control diagrams for DDC and BMS system.
• Review and approve shop drawings, vendor design packages for all mechanical underground utilities (storm and sanitary drainage, firefighting, LPG and Irrigation system) other site related quality and health and safety documentation.
• Review and approve material technical submittal for underground pipes, fittings and valve for mechanical utilities.
• Review and approved method of statement (MOS), submitted by subcontractors.
• Reviewing of precommissioning and commissioning procedures as per specifications and ARAMCO standards comply project requirements

Jabal Al Omer Project

(Includes 4 towers and 10 story shopping mall)

Consultant: Khatib and Alaami

Owner-JODC

Responsibilities

• Shop drawing Preparation of HVAC, plumbing and Fire protection as per ASHRAE, SMACNA, Uniform and International Plumbing code in view of Tender drawings.
• Preparing shop drawing in view of tender drawings.
• Preparing submittal for material and drawing and getting approved with the consultants.
• Review Schedule of equipment’s like, AHU, FCU systems etc…
• Calculation of CFM, GPM and ESP of Blowers.
• Chilled water pipe design and calculation of pump head.
• Shop drawing preparation and designing of Water distribution lines for sanitary fixtures, Preparation of Booster, lifting, sump pump and hot water Pump head calculations for approvals.
• Shop drawing preparation and Designing of Drainage system for the Project.
• Prepared water supply and Drainage riser diagrams for the Projects.
• Prepared all Plumbing technical rooms drawings for the projects.
• Preparation of Builders works drawings for block wall, shear wall and slab openings.
• Comparing quantities and Specifications as actual in approved drawing and B.O.Q.
• Material take off as per the project requirement.
• Involve at initial design stage & coordinate with the designer.
• Coordinating with the clients on site progress.
• Preparing all mechanical related material submittal for approval from consultant.
• Providing proper solutions & taking approval from consultant for hooking up the propose external services with existing infrastructure at diplomatic quarters.
• Follow up with the suppliers.
• Coordinating with all departments regarding the engineering issues.
• Raising RFIs and FCR’s for technical issues regarding the plumbing and firefighting works.
• Supervision of Plumbing, HVAC as per the project specifications, shop drawing & standards.
• Visiting the site for the updates and giving necessary information to the construction Manager.
• Preparing and attending minutes of meeting, weekly meeting with the consultant and client.
• Ensure that the work being carried out in accordance to specification & to applicable codes.
• Execute the work according to given schedule & achieve the milestone of the project.
• Preparing material requisitions for HVAC and plumbing works.
• Giving instructions to the supervisors and foreman’s regarding the site work.

Responsibilities

• Reviewing Material Submittal as per specifications after the material submittal prepared by the concerned engineers
• Following up with the consultant for Material Submittal approval and following up with the procurement department after getting approval from consultant.
• Following up on Method Statement, Inspection and Test Plan, Material Submittal, Inspection Request, Material Inspection Request, Builders Work drawing and Shop drawings logs prior to approval from consultant
• Checking the quality and quantity of the Material as receiving delivery note from store keeper.
• Raising Material Inspection Request with the attachment of Material submittal and Delivery note and following up with the consultant prior to approval
• Coordinating with the Quality Control Electrical Eng. and Civil Eng. And comparing builders work drawing with the General Arrangement Plan and Sections drawing for better performance of work
• Daily visiting the site with the concerned site engineer’s and inspecting the quality of the material installed as per technical submittal and specifications
• Checking whether the work done is accordingly as per approved builders work drawings and shop drawings
• Issuing the Non-Conformance Report to the Concerned engineers, if the work done is not as per the approved shop drawings or builders work drawings or if the material installation is not as per approved technical submittal or specifications
• Preparing and attending minutes of meeting, weekly meeting with the consultant and client
• Coordinating with the consultant and client on site progress
• Contract drawing specifications and bill of quantities.
• Verifying shop drawing in view of tender drawings.
• Material takes off as per the project requirement.