Faisal Majeed Ahmed

• Conducted on-site inspection of steel structure erection activities in accordance with Saudi Aramco Standards (SAES), approved IFC drawings, and project specifications.
• Verified erection sequence, lifting plans, and safe installation practices before and during steel erection works.
• Inspected column, beam, bracing, platform, pipe rack, and structural support installations for alignment, level, and plumbness.
• Checked anchor bolts setting, orientation, elevation, and grouting works as per approved drawings and tolerances.
• Inspected high-strength bolting works, including bolt tightening sequence, torque/tension checks, and bolt marking.
• Verified touch-up painting and coating repairs at site after erection and welding activities.
• Raised and followed up on Inspection Requests (RFIs), Site Observation Reports, and NCRs until closure.
• Ensured erection works were carried out in compliance with Saudi Aramco HSE requirements and approved method statements.
• Coordinated with construction supervisors, Aramco representatives, and consultants during daily site inspections.
• Maintained proper site QA/QC records, inspection checklists.

• Ensured all steel structure fabrication and erection activities complied with Saudi Aramco Standards (SAES), SAMSS, AWS, AISC, and approved IFC drawings.
• Conducted inspections for structural steel fabrication, including bolting, and assembly.
• Inspected high-strength bolting works as per approved procedures.
• Checked erection alignment, level, plumbness, and dimensional tolerances of steel structures.
• Raised Inspection Requests (IRs) and Non-Conformance Reports (NCRs) and ensured timely corrective actions.
• Maintained QA/QC documentation including inspection reports, test records.
• Coordinated with Saudi Aramco Inspectors, Consultants, and Construction teams during inspections and site activities.
• Ensured strict compliance with HSE and Saudi Aramco safety regulations at all times.

• Verify the approval of contract documents prior to the start of construction activities e.g. IFC, project specifications etc.
• Coordinate with construction team for ongoing civil/structural RFI, including but not limited to Anchor bolts, Shim plates, and further structural related foundation inspections prior to installation.
• Verify the approval of contract documents prior to the start of construction activities e.g. IFC, project specifications etc.
• Inspecting Structural Alignment with digital theodolite and preparing SATR-M-2001.
• Conducting materials receiving and erection of steel structure components e.g., beams. Columns, handrails, gratings, railings for platforms, roofs etc.
• Check that base plates that are installed at correct elevation.
• To ensure that braces and columns and beams are plumb, level, aligned and installed correctly.
• Project: North Gas Compression pipeline project
• Duration: February 2020 to Till Now

• Conducting inspections for platforms and pipe supports at valve stations and scrapper launchers/receivers.
• Conducted inspections at bolt pre-tensioning stages based on Turn of Nut and Calibrated Wrench Methods.
• Inspecting Structural Alignment with total station and preparing SATR-M-2001.
• Ensuring the level of foundations (Shim Plates), anchor bolts installation and checking of column base plate for installation of pipe racks platform shelters and process equipment installation.
• Monitoring installation of gratings, floor plate’s stair treads, handrails, toe plates, access ladders and overhead crane installation.
• Check that installed structural members and spans, tracks and rail are bolted and torqued correctly.
• Daily monitoring of A325 Bolts on site and using a Bolt tension calibrator to ascertain the Torque values while maintaining a log for each valve station.
• Project: MASTER GAS PIPELINE PHASE II
• Duration: February 2019 to November 2019

• Review of submittals of materials, QA / QC procedures, inspection and test plan.
• Undertook Stage Inspections of concrete and structural works.
• Inspections carried out as per inspection & testing Plan.
• Performed material receiving inspections at the construction site to ensure that materials are compliance with Company and International Standards.
• To perform QA/QC engineering inspection on reinforcement cement concrete frame structure Work, monitor during and after work execution conforming to international standards.
• Executes the specific inspections of materials and construction activities on site.
• Assisting during Quality audits on site and carrying out regular surveillance.
• Check the sampling operation when required.
• The control of on-site and off-site vendor inspectors.
• Ensure the verification of documentation and certificates for materials purchased.
• Review procurement documents to ensure that quality requirement have been correctly translated into purchase requisitions and design documents.
• Duration: January 2017 to December 2018

• Performed inspections of Structural Steel-Pipe rack, Steel Supports & Steel Structures, Incl. Piping Supports per Specification.
• Performed inspections of Structural or Equipment Installation and Structural Alignment prior to Grouting.
• Check the form work, reinforcing steel, embedded items, form closure & bending, protective covering & related activities prior to concrete pouring.
• Performed material receiving inspections at the construction site to ensure that materials are compliance with Company and International Standards.
• To perform QA/QC engineering inspection on reinforcement cement concrete frame structure Work, monitor during and after work execution conforming to international standards.
• Witnessing testing activities at site and third party laboratory.
• Complete knowledge of IFC drawing before starting the work.
• Issue NCR, Decide corrective action and verify close of NCR Control or corrective and Preventive action.
• Complete knowledge of IFC drawing before starting the work.
• Coordination with all departments about related site work.
• Monitoring daily progress of all foremen at site and assisting to resolve their difficulties.
• Duration: October 2013 to December 2016